develooper Front page | perl.cpan.testers | Postings from March 2008

FAIL JSON-PC-0.03 x86_64-linux-thread-multi-ld 2.6.22.10

From:
imacat
Date:
March 12, 2008 21:01
Subject:
FAIL JSON-PC-0.03 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Makamaka Hannyaharamitu,
    
This is a computer-generated report for JSON-PC-0.03
on perl 5.10.0, created by CPAN-Reporter-1.11. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-pod...............skipped: Test::Pod 1.00 required for testing POD
t/01-use...............Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like you planned 11 tests but only ran 3.
# Looks like your test died just after 3.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 8/11 subtests 
t/02-base..............Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 46/46 subtests 
t/03-circleref.........
#   Failed test at t/03-circleref.t line 17.
#                   'Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# '
#     doesn't match '(?-xism:circle ref)'

#   Failed test at t/03-circleref.t line 32.
#                   'Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# '
#     doesn't match '(?-xism:circle ref)'

#   Failed test at t/03-circleref.t line 41.
#                   'Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# '
#     doesn't match '(?-xism:circle ref)'
# Looks like you failed 3 tests of 4.
 Dubious, test returned 3 (wstat 768, 0x300)
 Failed 3/4 subtests 
t/04-autoconv..........Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 12/12 subtests 
t/05-esc...............Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 17/17 subtests 
t/06-comment...........Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVAV failed: file "json_converter.c", line 498 at lib/JSON/PC.pm line 39.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 11/11 subtests 
t/07-extra_number......ok
t/08-pretty............Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 17/17 subtests 
t/09-quote.............Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 47/47 subtests 
t/10-ordered...........Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 8/8 subtests 
t/11-convblessed.......Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like you planned 40 tests but only ran 1.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 39/40 subtests 
t/12-selfconv..........
#   Failed test 'skip invalid if you want smth...'
#   at t/12-selfconv.t line 20.
#                   'Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# '
#     doesn't match '(?-xism:Invalid value)'
Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like you planned 15 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test died just after 2.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 14/15 subtests 
t/13-expo..............Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVAV failed: file "json_converter.c", line 498 at lib/JSON/PC.pm line 39.
# Looks like you planned 8 tests but only ran 1.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 7/8 subtests 
t/14-utf8..............Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like you planned 21 tests but only ran 2.
# Looks like your test died just after 2.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 19/21 subtests 
t/15-singlequote.......Assertion ((svtype)((_svi)->sv_flags & 0xff)) != SVt_PVHV failed: file "json_converter.c", line 613 at lib/JSON/PC.pm line 39.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 7/7 subtests 

Test Summary Report
-------------------
t/01-use.t         (Wstat: 65280 Tests: 3 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 11 tests but ran 3.
t/02-base.t        (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 46 tests but ran 0.
t/03-circleref.t   (Wstat: 768 Tests: 4 Failed: 3)
  Failed tests:  1, 3-4
  Non-zero exit status: 3
t/04-autoconv.t    (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 12 tests but ran 0.
t/05-esc.t         (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 17 tests but ran 0.
t/06-comment.t     (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 11 tests but ran 0.
t/08-pretty.t      (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 17 tests but ran 0.
t/09-quote.t       (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 47 tests but ran 0.
t/10-ordered.t     (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 8 tests but ran 0.
t/11-convblessed.t (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 40 tests but ran 1.
t/12-selfconv.t    (Wstat: 65280 Tests: 2 Failed: 1)
  Failed test:  2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 15 tests but ran 2.
t/13-expo.t        (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 8 tests but ran 1.
t/14-utf8.t        (Wstat: 65280 Tests: 2 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 21 tests but ran 2.
t/15-singlequote.t (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 7 tests but ran 0.
Files=16, Tests=37,  1 wallclock secs ( 0.07 usr  0.00 sys +  0.71 cusr  0.08 csys =  0.86 CPU)
Result: FAIL
Failed 14/16 test programs. 4/37 subtests failed.
make: *** [test_dynamic] Error 255

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 11652
    PERL5_CPAN_IS_RUNNING = 11652
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.13     
    ExtUtils::Install   1.50     
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.78     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About