FAIL LJ-Schedule-0.6 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Ben Evans,
    
This is a computer-generated report for LJ-Schedule-0.6
on perl 5.10.0, created by CPAN-Reporter-1.11. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...........
#   Failed test 'use LJ::Schedule;'
#   at t/00-load.t line 6.
#     Tried to use 'LJ::Schedule'.
#     Error:  Can't locate Date/Parse.pm in @INC (@INC contains: /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/arch /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/arch /home/imacat/lib/perl5 /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/5.10.0 /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/site_perl/5.10.0) at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Vcal.pm line 6.
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Vcal.pm line 6.
# Compilation failed in require at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule.pm line 118.
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule.pm line 118.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.

#   Failed test 'use LJ::Schedule::Vcal;'
#   at t/00-load.t line 7.
#     Tried to use 'LJ::Schedule::Vcal'.
#     Error:  Attempt to reload LJ/Schedule/Vcal.pm aborted.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.

#   Failed test 'use LJ::Schedule::Post;'
#   at t/00-load.t line 8.
#     Tried to use 'LJ::Schedule::Post'.
#     Error:  Can't locate LJ/Simple.pm in @INC (@INC contains: /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/arch /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/arch /home/imacat/lib/perl5 /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/5.10.0 /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/site_perl/5.10.0) at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Post/Simple.pm line 8.
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Post/Simple.pm line 8.
# Compilation failed in require at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Post.pm line 78.
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Post.pm line 78.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.

#   Failed test 'use LJ::Schedule::Post::Simple;'
#   at t/00-load.t line 9.
#     Tried to use 'LJ::Schedule::Post::Simple'.
#     Error:  Attempt to reload LJ/Schedule/Post/Simple.pm aborted.
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at (eval 5) line 2.
Use of uninitialized value $LJ::Schedule::VERSION in concatenation (.) or string at t/00-load.t line 12.
# Testing LJ::Schedule , Perl 5.010000, /opt/perl/5.10.0/bin/perl
# Looks like you failed 4 tests of 4.
 Dubious, test returned 4 (wstat 1024, 0x400)
 Failed 4/4 subtests 
t/01schedule........
#   Failed test 'use LJ::Schedule;'
#   at t/01schedule.t line 6.
#     Tried to use 'LJ::Schedule'.
#     Error:  Can't locate Date/Parse.pm in @INC (@INC contains: /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/arch /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/arch /home/imacat/lib/perl5 /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/5.10.0 /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/site_perl/5.10.0) at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Vcal.pm line 6.
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Vcal.pm line 6.
# Compilation failed in require at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule.pm line 118.
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule.pm line 118.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
Undefined subroutine &LJ::Schedule::get_config called at t/01schedule.t line 9.
# Looks like you planned 7 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 7/7 subtests 
t/02vcal............
#   Failed test 'use LJ::Schedule::Vcal;'
#   at t/02vcal.t line 8.
#     Tried to use 'LJ::Schedule::Vcal'.
#     Error:  Can't locate Date/Parse.pm in @INC (@INC contains: /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/arch /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/arch /home/imacat/lib/perl5 /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/5.10.0 /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/site_perl/5.10.0) at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Vcal.pm line 6.
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/LJ-Schedule-0.6-OlNL9w/blib/lib/LJ/Schedule/Vcal.pm line 6.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
Can't locate object method "new" via package "LJ::Schedule::Vcal" at t/02vcal.t line 15.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 2/2 subtests 
t/boilerplate.......ok
t/pod-coverage......skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod...............skipped: Test::Pod 1.14 required for testing POD

Test Summary Report
-------------------
t/00-load.t     (Wstat: 1024 Tests: 4 Failed: 4)
  Failed tests:  1-4
  Non-zero exit status: 4
t/01schedule.t  (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 7 tests but ran 1.
t/02vcal.t      (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 2 tests but ran 1.
Files=6, Tests=12,  1 wallclock secs ( 0.04 usr  0.01 sys +  0.19 cusr  0.03 csys =  0.27 CPU)
Result: FAIL
Failed 3/6 test programs. 6/12 subtests failed.
make: *** [test_dynamic] Error 255

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module     Need Have
    ---------- ---- ----
    Test::More 0    0.78

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 5439
    PERL5_CPAN_IS_RUNNING = 5439
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.13     
    ExtUtils::Install   1.50     
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.78     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

• FAIL LJ-Schedule-0.6 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat