Front page | perl.cpan.testers |
Postings from March 2008
FAIL Samba-LDAP-0.05 i686-linux-64int 2.6.16-2-k7
From:
andreas.koenig.gmwojprw
Date:
March 7, 2008 13:43
Subject:
FAIL Samba-LDAP-0.05 i686-linux-64int 2.6.16-2-k7
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Gavin Henry,
This is a computer-generated report for Samba-LDAP-0.05
on perl 5.6.2, created by CPAN-Reporter-1.11.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
/usr/local/perl-5.6.2/bin/perl "-Iinc" Makefile.PL --config= --installdeps=Regexp::DefaultFlags,0.01,Crypt::SmbHash,0.12
Cannot determine perl version info from lib/Samba/LDAP.pm
Cannot determine license info from lib/Samba/LDAP.pm
PERL_DL_NONLAZY=1 /usr/local/perl-5.6.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/00.load.t t/01.distribution.t t/02.trival_creations.t t/03.config.t t/04.base.t t/05.version.t t/06.main.t t/07.group.t t/08.user.t t/09.machine.t t/pod-coverage.t t/pod.t
t/00.load..................
# Failed test 'use Samba::LDAP;'
# at t/00.load.t line 8.
# Tried to use 'Samba::LDAP'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# Compilation failed in require at (eval 14) line 3, <DATA> line 228.
# ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP.pm line 12, <DATA> line 228.
# Compilation failed in require at (eval 3) line 2, <DATA> line 228.
# BEGIN failed--compilation aborted at (eval 3) line 2, <DATA> line 228.
Use of uninitialized value in concatenation (.) or string at t/00.load.t line 11, <DATA> line 228.
# Testing Samba::LDAP
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/01.distribution..........
# Failed test 'use Samba::LDAP;'
# at /usr/local/perl-5.6.2/lib/site_perl/5.6.2/Test/Distribution.pm line 177.
# Tried to use 'Samba::LDAP'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# Compilation failed in require at (eval 47) line 3, <DATA> line 228.
# ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP.pm line 12, <DATA> line 228.
# Compilation failed in require at (eval 36) line 2, <DATA> line 228.
# BEGIN failed--compilation aborted at (eval 36) line 2, <DATA> line 228.
# Failed test 'use Samba::LDAP::Group;'
# at /usr/local/perl-5.6.2/lib/site_perl/5.6.2/Test/Distribution.pm line 177.
# Tried to use 'Samba::LDAP::Group'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Group.pm line 24
# Compilation failed in require at (eval 51) line 2, <DATA> line 228.
# BEGIN failed--compilation aborted at (eval 51) line 2, <DATA> line 228.
# Failed test 'use Samba::LDAP::User;'
# at /usr/local/perl-5.6.2/lib/site_perl/5.6.2/Test/Distribution.pm line 177.
# Tried to use 'Samba::LDAP::User'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/User.pm line 29
# Compilation failed in require at (eval 54) line 2.
# BEGIN failed--compilation aborted at (eval 54) line 2.
# Failed test 'use Samba::LDAP::Machine;'
# at /usr/local/perl-5.6.2/lib/site_perl/5.6.2/Test/Distribution.pm line 177.
# Tried to use 'Samba::LDAP::Machine'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Machine.pm line 21
# Compilation failed in require at (eval 57) line 2.
# BEGIN failed--compilation aborted at (eval 57) line 2.
# Failed test 'Samba::LDAP defines a version'
# at /usr/local/perl-5.6.2/lib/site_perl/5.6.2/Test/Distribution.pm line 212.
# Looks like you failed 5 tests of 30.
Dubious, test returned 5 (wstat 1280, 0x500)
Failed 5/30 subtests
(less 1 skipped subtest: 24 okay)
t/02.trival_creations......
# Failed test 'use Samba::LDAP;'
# at t/02.trival_creations.t line 8.
# Tried to use 'Samba::LDAP'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# Compilation failed in require at (eval 14) line 3, <DATA> line 228.
# ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP.pm line 12, <DATA> line 228.
# Compilation failed in require at (eval 3) line 2, <DATA> line 228.
# BEGIN failed--compilation aborted at (eval 3) line 2, <DATA> line 228.
# Failed test 'use Samba::LDAP::Group;'
# at t/02.trival_creations.t line 10.
# Tried to use 'Samba::LDAP::Group'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Group.pm line 24
# Compilation failed in require at (eval 18) line 2, <DATA> line 228.
# BEGIN failed--compilation aborted at (eval 18) line 2, <DATA> line 228.
# Failed test 'use Samba::LDAP::User;'
# at t/02.trival_creations.t line 11.
# Tried to use 'Samba::LDAP::User'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/User.pm line 29
# Compilation failed in require at (eval 20) line 2.
# BEGIN failed--compilation aborted at (eval 20) line 2.
Can't locate object method "new" via package "Samba::LDAP" (perhaps you forgot to load "Samba::LDAP"?) at t/02.trival_creations.t line 16.
# Looks like you planned 20 tests but only ran 4.
# Looks like you failed 3 tests of 4 run.
# Looks like your test died just after 4.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 19/20 subtests
t/03.config................
# Failed test 'use Samba::LDAP::Config;'
# at t/03.config.t line 8.
# Tried to use 'Samba::LDAP::Config'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Looks like you failed 1 test of 6.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/6 subtests
t/04.base..................First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9.
Compilation failed in require at t/04.base.t line 5.
BEGIN failed--compilation aborted at t/04.base.t line 5.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/05.version...............
# Failed test 'use Samba::LDAP;'
# at t/05.version.t line 8.
# Tried to use 'Samba::LDAP'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# Compilation failed in require at (eval 14) line 3, <DATA> line 228.
# ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP.pm line 12, <DATA> line 228.
# Compilation failed in require at (eval 3) line 2, <DATA> line 228.
# BEGIN failed--compilation aborted at (eval 3) line 2, <DATA> line 228.
Can't locate object method "new" via package "Samba::LDAP" (perhaps you forgot to load "Samba::LDAP"?) at t/05.version.t line 11, <DATA> line 228.
# Looks like you planned 4 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/4 subtests
t/06.main..................
# Failed test 'use Samba::LDAP;'
# at t/06.main.t line 8.
# Tried to use 'Samba::LDAP'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9, <DATA> line 228.
# Compilation failed in require at (eval 14) line 3, <DATA> line 228.
# ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91, <DATA> line 228.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP.pm line 12, <DATA> line 228.
# Compilation failed in require at (eval 3) line 2, <DATA> line 228.
# BEGIN failed--compilation aborted at (eval 3) line 2, <DATA> line 228.
Can't locate object method "new" via package "Samba::LDAP" (perhaps you forgot to load "Samba::LDAP"?) at t/06.main.t line 11, <DATA> line 228.
# Looks like you planned 4 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/4 subtests
t/07.group.................
# Failed test 'use Samba::LDAP::Group;'
# at t/07.group.t line 8.
# Tried to use 'Samba::LDAP::Group'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9.
# Compilation failed in require at (eval 7) line 3.
# ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Group.pm line 11.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "Samba::LDAP::Group" (perhaps you forgot to load "Samba::LDAP::Group"?) at t/07.group.t line 11.
# Looks like you planned 3 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
t/08.user..................
# Failed test 'use Samba::LDAP::User;'
# at t/08.user.t line 8.
# Tried to use 'Samba::LDAP::User'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9.
# Compilation failed in require at (eval 9) line 3.
# ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/User.pm line 18.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "Samba::LDAP::User" (perhaps you forgot to load "Samba::LDAP::User"?) at t/08.user.t line 11.
# Looks like you planned 3 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
t/09.machine...............
# Failed test 'use Samba::LDAP::Machine;'
# at t/09.machine.t line 8.
# Tried to use 'Samba::LDAP::Machine'.
# Error: First argument to Readonly must be a reference. at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Config.pm line 18
# Compilation failed in require at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Base.pm line 9.
# Compilation failed in require at (eval 9) line 3.
# ...propagated at /usr/local/perl-5.6.2/lib/5.6.2/base.pm line 91.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Samba-LDAP-0.05-rE5Khv/blib/lib/Samba/LDAP/Machine.pm line 12.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Can't locate object method "new" via package "Samba::LDAP::Machine" (perhaps you forgot to load "Samba::LDAP::Machine"?) at t/09.machine.t line 11.
# Looks like you planned 3 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
t/pod-coverage.............ok
t/pod......................ok
Test Summary Report
-------------------
t/00.load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/01.distribution.t (Wstat: 1280 Tests: 30 Failed: 5)
Failed tests: 2, 4, 6-8
Non-zero exit status: 5
t/02.trival_creations.t (Wstat: 65280 Tests: 4 Failed: 3)
Failed tests: 1, 3-4
Non-zero exit status: 255
Parse errors: Bad plan. You planned 20 tests but ran 4.
t/03.config.t (Wstat: 256 Tests: 6 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/04.base.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/05.version.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 4 tests but ran 1.
t/06.main.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 4 tests but ran 1.
t/07.group.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
t/08.user.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
t/09.machine.t (Wstat: 65280 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 1.
Files=12, Tests=58, 14 wallclock secs ( 0.11 usr 0.03 sys + 4.40 cusr 0.26 csys = 4.80 CPU)
Result: FAIL
Failed 10/12 test programs. 15/58 subtests failed.
make: *** [test_dynamic] Fehler 11
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------------- ---- -------
Class::Base 0.03 0.03
Config::Tiny 2.05 2.10
Crypt::SmbHash 0.12 0.12
Digest::MD5 2.36 2.36
Digest::SHA1 2.11 2.11
File::Path 0 2.00_11
List::MoreUtils 0.19 0.21
MIME::Base64 3.07 3.07
Net::LDAP 0.33 0.34
Readonly 1.03 1.03
Regexp::DefaultFlags 0.01 0.01
Test::Distribution 1.23 2.00
Test::More 0.62 0.74
Unicode::MapUTF8 1.11 1.11
UNIVERSAL::require 0.10 0.11
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = de_DE.UTF-8
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 29772
PERL5_CPAN_IS_RUNNING = 29772
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/local/perl-5.6.2/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_57
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.13
ExtUtils::Install 1.49
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51
ExtUtils::ParseXS 2.19
File::Spec 3.2701
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.74
YAML n/a
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
Platform:
osname=linux, osvers=2.6.16-2-k7, archname=i686-linux-64int
uname='linux k75 2.6.16-2-k7 #2 mon may 22 23:23:54 utc 2006 i686 gnulinux '
config_args='-Dprefix=/usr/local/perl-5.6.2 -Dinstallusrbinperl=n -Uversiononly -Doptimize=-g -es -Duse64bitint -Dusedevel -des'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
Compiler:
cc='cc', ccflags ='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g',
cppflags='-DDEBUGGING -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='4.0.4 20060507 (prerelease) (Debian 4.0.3-3)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, usemymalloc=n, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lc -lcrypt -lutil
perllibs=-lnsl -ldl -lm -lc -lcrypt -lutil
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
-
FAIL Samba-LDAP-0.05 i686-linux-64int 2.6.16-2-k7
by andreas.koenig.gmwojprw