FAIL Data-FeatureFactory-0.04 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear SIXTEASE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat Mar  8 01:59:56 2008] Trying to get 'http://www.cpan.org/authors/id/S/SI/SIXTEASE/Data-FeatureFactory-0.04.tar.gz'
[MSG] [Sat Mar  8 02:00:00 2008] Trying to get 'http://www.cpan.org/authors/id/S/SI/SIXTEASE/CHECKSUMS'
[MSG] [Sat Mar  8 02:00:02 2008] Checksum matches for 'Data-FeatureFactory-0.04.tar.gz'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/t/'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/t/OuterModule.pm'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/t/lcletters.txt'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/t/00-evaluate.t'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/t/01-translate.t'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/t/__Example.pm'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/lib/'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/lib/Data/'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/lib/Data/FeatureFactory.pm'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/README'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/Changes'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/Makefile.PL'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data-FeatureFactory/MANIFEST'
[MSG] [Sat Mar  8 02:00:02 2008] Extracted 'Data::FeatureFactory' to '/opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory'
[MSG] [Sat Mar  8 02:00:02 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Data::FeatureFactory

[MSG] [Sat Mar  8 02:00:02 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Mar  8 02:00:03 2008] cp lib/Data/FeatureFactory.pm blib/lib/Data/FeatureFactory.pm
Manifying blib/man3/Data::FeatureFactory.3

[ERROR] [Sat Mar  8 02:00:03 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/00-evaluate.......Can't locate List/MoreUtils.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/lib/Data/FeatureFactory.pm line 413.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/lib/Data/FeatureFactory.pm line 413.
Compilation failed in require at (eval 2) line 3.
	...propagated at /opt/perl/testers/lib/5.8.8/base.pm line 91.
BEGIN failed--compilation aborted at t/00-evaluate.t line 41.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 113/113 subtests 
t/01-translate......Can't locate List/MoreUtils.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Data-FeatureFactory/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at t/01-translate.t line 6.
BEGIN failed--compilation aborted at t/01-translate.t line 6.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 37/37 subtests 

Test Summary Report
-------------------
t/00-evaluate.t (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 113 tests but ran 0.
t/01-translate.t (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 37 tests but ran 0.
Files=2, Tests=0,  0 wallclock secs ( 0.01 usr  0.00 sys +  0.03 cusr  0.03 csys =  0.07 CPU)
Result: FAIL
Failed 2/2 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Sat Mar  8 02:00:03 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

List::MoreUtils

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'SIXTEASE (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'List::MoreUtils'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Carp                               1.04        0
	  File::Basename                     2.74        0
	  Test::More                         0.78        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Data-FeatureFactory-0.04 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat