Front page | perl.cpan.testers |
Postings from March 2008
FAIL Catalyst-View-CSV-0.01 i386-netbsd-thread-multi-64int 3.1
Thread Previous
|
Thread Next
From:
chris
Date:
March 3, 2008 11:37
Subject:
FAIL Catalyst-View-CSV-0.01 i386-netbsd-thread-multi-64int 3.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear GAUDEON,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Mar 3 19:36:14 2008] Trying to get 'http://www.cpan.org/authors/id/G/GA/GAUDEON/CHECKSUMS'
[MSG] [Mon Mar 3 19:36:15 2008] Checksum matches for 'Catalyst-View-CSV-0.01.tar.gz'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/Changes'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/lib/'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/lib/Catalyst/'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/lib/Catalyst/View/'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/lib/Catalyst/View/CSV.pm'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/Makefile.PL'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/MANIFEST'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/META.yml'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/README'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/t/'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/t/00-load.t'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/t/pod-coverage.t'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst-View-CSV-0.01/t/pod.t'
[MSG] [Mon Mar 3 19:36:15 2008] Extracted 'Catalyst::View::CSV' to '/home/cpan/.cpanplus/5.8.8/build/Catalyst-View-CSV-0.01'
[MSG] [Mon Mar 3 19:36:16 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Text::CSV 1.00 not found.
Writing Makefile for Catalyst::View::CSV
[MSG] [Mon Mar 3 19:36:16 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Mar 3 19:36:16 2008] Module 'Catalyst::View::CSV' requires 'Text::CSV' version '1.00' to be installed
[MSG] [Mon Mar 3 19:36:16 2008] Trying to get 'http://www.cpan.org/authors/id/M/MA/MAKAMAKA/CHECKSUMS'
[MSG] [Mon Mar 3 19:36:17 2008] Checksum matches for 'Text-CSV-1.00.tar.gz'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/Changes'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/lib/'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/lib/Text/'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/lib/Text/CSV.pm'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/lib/Text/CSV_PP.pm'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/Makefile.PL'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/MANIFEST'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/META.yml'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/README'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/00_pod.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/10_base.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/12_acc.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/15_flags.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/20_file.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/21_lexicalio.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/22_scalario.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/30_types.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/40_misc.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/45_eol.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/50_utf8.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/55_combi.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/60_samples.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/65_allow.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/70_rt.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/80_diag.t'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text-CSV-1.00/t/util.pl'
[MSG] [Mon Mar 3 19:36:18 2008] Extracted 'Text::CSV' to '/home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00'
[MSG] [Mon Mar 3 19:36:19 2008] Writing Makefile for Text::CSV
[MSG] [Mon Mar 3 19:36:19 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Mar 3 19:36:20 2008] Manifying blib/man3/Text::CSV_PP.3
Manifying blib/man3/Text::CSV.3
[MSG] [Mon Mar 3 19:36:43 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_pod..........skipped
all skipped: Test::Pod 1.00 required for testing POD
t/10_base.........ok
t/12_acc..........ok
t/15_flags........ok
t/20_file.........ok
t/21_lexicalio....ok
t/22_scalario.....ok
t/30_types........ok
t/40_misc.........ok
t/45_eol..........ok
t/50_utf8.........ok
t/55_combi........ok
t/60_samples......ok
t/65_allow........ok
t/70_rt...........ok
t/80_diag.........# Next line should be an error message
# CSV_PP ERROR: 2027 - 2027
ok
All tests successful, 1 test skipped.
Files=16, Tests=10510, 23 wallclock secs (14.72 cusr + 0.79 csys = 15.51 CPU)
[MSG] [Mon Mar 3 19:36:43 2008] Ok, not sending test report
[MSG] [Mon Mar 3 19:36:46 2008] cp lib/Catalyst/View/CSV.pm blib/lib/Catalyst/View/CSV.pm
Manifying blib/man3/Catalyst::View::CSV.3
[ERROR] [Mon Mar 3 19:36:46 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.........
# Failed test 'use Catalyst::View::CSV;'
# at t/00-load.t line 6.
# Tried to use 'Catalyst::View::CSV'.
# Error: Can't locate Catalyst/Exception.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Catalyst-View-CSV-0.01/blib/lib /home/cpan/.cpanplus/5.8.8/build/Catalyst-View-CSV-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib/lib /home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib/arch /home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib /home/cpan/.cpanplus/5.8.8/build/Catalyst-View-CSV-0.01/blib /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl . /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl) at /home/cpan/.cpanplus/5.8.8/build/Catalyst-View-CSV-0.01/blib/lib/Catalyst/View/CSV.pm line 6.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9.
# Testing Catalyst::View::CSV , Perl 5.008008, /home/cpan/perl588/bin/perl
# Looks like you failed 1 test of 1.
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
t/pod-coverage....skipped
all skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod.............skipped
all skipped: Test::Pod 1.22 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/00-load.t 1 256 1 1 1
2 tests skipped.
Failed 1/3 test scripts. 1/1 subtests failed.
Files=3, Tests=1, 0 wallclock secs ( 0.28 cusr + 0.10 csys = 0.38 CPU)
Failed 1/3 test programs. 1/1 subtests failed.
gmake:
[MSG] [Mon Mar 3 19:36:46 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Catalyst::Exception
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'GAUDEON (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'Catalyst::Exception' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.70 0
Text::CSV 1.00 1.00
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib:/home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Text-CSV-1.00/blib:/home/cpan/.cpanplus/5.8.8/build/Catalyst-View-CSV-0.01/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Catalyst-View-CSV-0.01/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Catalyst-View-CSV-0.01/blib
PERL5_CPANPLUS_IS_RUNNING = 22319
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl588/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-R/home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE'
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Thread Previous
|
Thread Next