PASS Relations-0.95 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear George A. Fitch III,
    
This is a computer-generated report for Relations-0.95
on perl 5.10.0, created by CPAN-Reporter-1.09. 

Thank you for uploading your work to CPAN.  Congratulations!
All tests were successful.

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

[this report is from an automated smoke testing program
 and was not reviewed by a human for accuracy]

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
Settings configuration aborted at Relations.pm line 833, <STDIN> line 6.

    Before we can get started, I need to know some
    info about your MySQL settings. Please fill in
    the blanks below. To accept the default values
    in the []'s, just hit return.
  
    MYSQL DATABASE NAME
    Make sure the database isn't the same as the name
    as an existing database of yours, since the this 
    script will delete that database when run.
  
Database name [test]:
    MYSQL USERNAME AND PASSWORD
    Make sure the this username password account can
    create and destroy databases.
  
Username [me]:
Password [hide]:
    MYSQL HOST AND PORT
    Make sure the computer running the demo can connect to
    this host and port, or this script will not function
    properly.
  
Host [here]:
Port [2525]:
    Using settings:
      database: test
      username: me
      password: hide
      host: here
      port: 2525
  
Create Settings.pm? (y/n) [n]:
    Before we can get started, I need to know some
    info about your MySQL settings. Please fill in
    the blanks below. To accept the default values
    in the []'s, just hit return.
  
    MYSQL DATABASE NAME
    Make sure the database isn't the same as the name
    as an existing database of yours, since the this 
    script will delete that database when run.
  
Database name [test]:
    MYSQL USERNAME AND PASSWORD
    Make sure the this username password account can
    create and destroy databases.
  
Username [me]:
Password [hide]:
    MYSQL HOST AND PORT
    Make sure the computer running the demo can connect to
    this host and port, or this script will not function
    properly.
  
Host [here]:
Port [2525]:
    Using settings:
      database: test
      username: me
      password: hide
      host: here
      port: 2525
  
Create Settings.pm? (y/n) [n]:
    Before we can get started, I need to know some
    info about your MySQL settings. Please fill in
    the blanks below. To accept the default values
    in the []'s, just hit return.
  
    MYSQL DATABASE NAME
    Make sure the database isn't the same as the name
    as an existing database of yours, since the this 
    script will delete that database when run.
  
Database name [test]:
    MYSQL USERNAME AND PASSWORD
    Make sure the this username password account can
    create and destroy databases.
  
Username [me]:
Password [hide]:
    MYSQL HOST AND PORT
    Make sure the computer running the demo can connect to
    this host and port, or this script will not function
    properly.
  
Host [here]:
Port [2525]:
    Using settings:
      database: pass
      username: you
      password: find
      host: there
      port: 5252
  
Create Settings.pm? (y/n) [n]:


Everything seems fine.

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 30009
    PERL5_CPAN_IS_RUNNING = 30009
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/zsh
    TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.13     
    ExtUtils::Install   1.44     
    ExtUtils::MakeMaker 6.42     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19     
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.09     
    Test::More          0.75     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

• PASS Relations-0.95 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat