Front page | perl.cpan.testers |
Postings from February 2008
FAIL OpenPlugin-0.11 x86_64-linux-thread-multi-ld 2.6.22.10
From:
imacat
Date:
February 25, 2008 22:52
Subject:
FAIL OpenPlugin-0.11 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Eric Andreychek,
This is a computer-generated report for OpenPlugin-0.11
on perl 5.10.0, created by CPAN-Reporter-1.09.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[this report is from an automated smoke testing program
and was not reviewed by a human for accuracy]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
/opt/perl/5.10.0/bin/perl Makefile.PL --config=force,0 --installdeps=Class::Factory,1.0,MD5,0,Error,0,Devel::StackTrace,0,Params::Validate,0,XML::DOM,1.29,Log::Dispatch,2.00,Log::Log4perl,0.25,HTML::Template,0,CGI::Application,2.6,Digest::SHA1,2.02,Cache::Cache,0,Config::General,0,DBI,0,Apache::Session,1.54
*** Installing dependencies...
[MSG] Checking if source files are up to date
[MSG] Retrieving /opt/perl/testers/.cpanplus/sourcefiles.2.18.stored
[MSG] No '/opt/perl/testers/.cpanplus/custom-sources' dir, skipping custom sources
*** Installing Class::Factory...
[MSG] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/P/PH/PHRED/CHECKSUMS'
[MSG] Checksum matches for 'Class-Factory-1.06.tar.gz'
[MSG] Extracted 'Class-Factory-1.06/'
[MSG] Extracted 'Class-Factory-1.06/Changes'
[MSG] Extracted 'Class-Factory-1.06/lib/'
[MSG] Extracted 'Class-Factory-1.06/lib/Class/'
[MSG] Extracted 'Class-Factory-1.06/lib/Class/Factory.pm'
[MSG] Extracted 'Class-Factory-1.06/Makefile.PL'
[MSG] Extracted 'Class-Factory-1.06/MANIFEST'
[MSG] Extracted 'Class-Factory-1.06/META.yml'
[MSG] Extracted 'Class-Factory-1.06/README'
[MSG] Extracted 'Class-Factory-1.06/t/'
[MSG] Extracted 'Class-Factory-1.06/t/factory.t'
[MSG] Extracted 'Class-Factory-1.06/t/MyCountryBand.pm'
[MSG] Extracted 'Class-Factory-1.06/t/MyFlexibleBand.pm'
[MSG] Extracted 'Class-Factory-1.06/t/MyRockBand.pm'
[MSG] Extracted 'Class-Factory-1.06/t/MySimpleBand.pm'
[MSG] Extracted 'Class::Factory' to '/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
==> MISSING Signature file! <==
Running [/opt/perl/5.10.0/bin/perl /opt/perl/testers/bin/cpanp-run-perl /opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06/Makefile.PL ]...
Writing Makefile for Class::Factory
Running [/usr/bin/make -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
Manifying blib/man3/Class::Factory.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
Running [/usr/bin/make test -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/factory......ok
All tests successful.
Files=1, Tests=39, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr 0.01 csys = 0.09 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
[MSG] MAKE TEST passed: make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/factory......ok
All tests successful.
Files=1, Tests=39, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr 0.01 csys = 0.09 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
Could not find or check module 'YAML::Tiny' [THIS MAY BE A PROBLEM!] at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Internals/Report.pm line 96
[ERROR] You don't have 'Test::Reporter' (or modules required by 'Test::Reporter') installed, you cannot report test results.
[ERROR] Failed to send test report for 'Class::Factory'
Running [/usr/bin/make install -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0/Class'
mkdir /opt/perl/5.10.0/lib/site_perl/5.10.0/Class: ©Úµ´¤£²ÅÅvªº¾Þ§@ at /opt/perl/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 479
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
Manifying blib/man3/Class::Factory.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0/Class'
mkdir /opt/perl/5.10.0/lib/site_perl/5.10.0/Class: ©Úµ´¤£²ÅÅvªº¾Þ§@ at /opt/perl/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 479
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
Manifying blib/man3/Class::Factory.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Class-Factory-1.06'
Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Backend.pm line 395
*** Class::Factory installation cancelled.
*** Installing MD5...
[MSG] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/G/GA/GAAS/CHECKSUMS'
[MSG] Checksum matches for 'MD5-2.03.tar.gz'
[MSG] Extracted 'MD5-2.03/'
[MSG] Extracted 'MD5-2.03/MANIFEST'
[MSG] Extracted 'MD5-2.03/t/'
[MSG] Extracted 'MD5-2.03/t/md5.t'
[MSG] Extracted 'MD5-2.03/Changes'
[MSG] Extracted 'MD5-2.03/README'
[MSG] Extracted 'MD5-2.03/Makefile.PL'
[MSG] Extracted 'MD5-2.03/MD5.pm'
[MSG] Extracted 'MD5' to '/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
==> MISSING Signature file! <==
Running [/opt/perl/5.10.0/bin/perl /opt/perl/testers/bin/cpanp-run-perl /opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03/Makefile.PL ]...
Writing Makefile for MD5
Running [/usr/bin/make -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
Manifying blib/man3/MD5.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
Running [/usr/bin/make test -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/md5......ok
All tests successful.
Files=1, Tests=14, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.02 cusr 0.00 csys = 0.03 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
[MSG] MAKE TEST passed: make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/md5......ok
All tests successful.
Files=1, Tests=14, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.02 cusr 0.00 csys = 0.03 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
Already tried to use 'YAML::Tiny', which was unsuccessful [THIS MAY BE A PROBLEM!] at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Internals/Report.pm line 96
[ERROR] You don't have 'Test::Reporter' (or modules required by 'Test::Reporter') installed, you cannot report test results.
[ERROR] Failed to send test report for 'MD5'
Running [/usr/bin/make install -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0'
Do not have write permissions on '/opt/perl/5.10.0/lib/site_perl/5.10.0'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0'
Do not have write permissions on '/opt/perl/5.10.0/lib/site_perl/5.10.0'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 2
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/MD5-2.03'
Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Backend.pm line 395
*** MD5 installation cancelled.
*** Installing Error...
[MSG] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/S/SH/SHLOMIF/CHECKSUMS'
[MSG] Checksum matches for 'Error-0.17012.tar.gz'
[MSG] Extracted 'Error-0.17012/'
[MSG] Extracted 'Error-0.17012/lib/'
[MSG] Extracted 'Error-0.17012/lib/Error.pm'
[MSG] Extracted 'Error-0.17012/lib/Error/'
[MSG] Extracted 'Error-0.17012/lib/Error/Simple.pm'
[MSG] Extracted 'Error-0.17012/examples/'
[MSG] Extracted 'Error-0.17012/examples/next-in-loop/'
[MSG] Extracted 'Error-0.17012/examples/next-in-loop/Error.pm-eval.pl'
[MSG] Extracted 'Error-0.17012/examples/next-in-loop/Error.pm-next-out-of-catch.pl'
[MSG] Extracted 'Error-0.17012/examples/next-in-loop/Error.pm-next-label.pl'
[MSG] Extracted 'Error-0.17012/examples/next-in-loop/README'
[MSG] Extracted 'Error-0.17012/examples/next-in-loop/Error.pm-next.pl'
[MSG] Extracted 'Error-0.17012/examples/warndie.pl'
[MSG] Extracted 'Error-0.17012/examples/example.pl'
[MSG] Extracted 'Error-0.17012/t/'
[MSG] Extracted 'Error-0.17012/t/09dollar-at.t'
[MSG] Extracted 'Error-0.17012/t/07try-in-obj-destructor.t'
[MSG] Extracted 'Error-0.17012/t/04use-base-Error-Simple.t'
[MSG] Extracted 'Error-0.17012/t/12wrong-error-var.t'
[MSG] Extracted 'Error-0.17012/t/11rethrow.t'
[MSG] Extracted 'Error-0.17012/t/01throw.t'
[MSG] Extracted 'Error-0.17012/t/08warndie.t'
[MSG] Extracted 'Error-0.17012/t/10throw-in-catch.t'
[MSG] Extracted 'Error-0.17012/t/pod-coverage.t'
[MSG] Extracted 'Error-0.17012/t/pod.t'
[MSG] Extracted 'Error-0.17012/t/03throw-non-Error.t'
[MSG] Extracted 'Error-0.17012/t/05text-errors-with-file-handles.t'
[MSG] Extracted 'Error-0.17012/t/13except-arg0.t'
[MSG] Extracted 'Error-0.17012/t/02order.t'
[MSG] Extracted 'Error-0.17012/t/lib/'
[MSG] Extracted 'Error-0.17012/t/lib/MyDie.pm'
[MSG] Extracted 'Error-0.17012/t/06customize-text-throw.t'
[MSG] Extracted 'Error-0.17012/MANIFEST'
[MSG] Extracted 'Error-0.17012/inc/'
[MSG] Extracted 'Error-0.17012/inc/Test/'
[MSG] Extracted 'Error-0.17012/inc/Test/Run/'
[MSG] Extracted 'Error-0.17012/inc/Test/Run/Builder.pm'
[MSG] Extracted 'Error-0.17012/META.yml'
[MSG] Extracted 'Error-0.17012/ChangeLog'
[MSG] Extracted 'Error-0.17012/README'
[MSG] Extracted 'Error-0.17012/Makefile.PL'
[MSG] Extracted 'Error-0.17012/Build.PL'
[MSG] Extracted 'Error' to '/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
==> MISSING Signature file! <==
Running [/opt/perl/5.10.0/bin/perl /opt/perl/testers/bin/cpanp-run-perl /opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012/Makefile.PL ]...
Writing Makefile for Error
Running [/usr/bin/make -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
Manifying blib/man3/Error.3
Manifying blib/man3/Error::Simple.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
Running [/usr/bin/make test -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01throw..............................ok
t/02order..............................ok
t/03throw-non-Error....................ok
t/04use-base-Error-Simple..............ok
t/05text-errors-with-file-handles......ok
t/06customize-text-throw...............ok
t/07try-in-obj-destructor..............ok
t/08warndie............................ok
t/09dollar-at..........................ok
t/10throw-in-catch.....................ok
t/11rethrow............................ok
t/12wrong-error-var....................ok
t/13except-arg0........................ok
t/pod-coverage.........................skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod..................................skipped: Test::Pod 1.14 required for testing POD
All tests successful.
Files=15, Tests=60, 1 wallclock secs ( 0.07 usr 0.01 sys + 0.63 cusr 0.08 csys = 0.79 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
[MSG] MAKE TEST passed: make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01throw..............................ok
t/02order..............................ok
t/03throw-non-Error....................ok
t/04use-base-Error-Simple..............ok
t/05text-errors-with-file-handles......ok
t/06customize-text-throw...............ok
t/07try-in-obj-destructor..............ok
t/08warndie............................ok
t/09dollar-at..........................ok
t/10throw-in-catch.....................ok
t/11rethrow............................ok
t/12wrong-error-var....................ok
t/13except-arg0........................ok
t/pod-coverage.........................skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod..................................skipped: Test::Pod 1.14 required for testing POD
All tests successful.
Files=15, Tests=60, 1 wallclock secs ( 0.07 usr 0.01 sys + 0.63 cusr 0.08 csys = 0.79 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
Already tried to use 'YAML::Tiny', which was unsuccessful [THIS MAY BE A PROBLEM!] at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Internals/Report.pm line 96
[ERROR] You don't have 'Test::Reporter' (or modules required by 'Test::Reporter') installed, you cannot report test results.
[ERROR] Failed to send test report for 'Error'
Running [/usr/bin/make install -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0'
Do not have write permissions on '/opt/perl/5.10.0/lib/site_perl/5.10.0'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 2
make[1]: *** Waiting for unfinished jobs....
Manifying blib/man3/Error.3
Manifying blib/man3/Error::Simple.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0'
Do not have write permissions on '/opt/perl/5.10.0/lib/site_perl/5.10.0'
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 2
make[1]: *** Waiting for unfinished jobs....
Manifying blib/man3/Error.3
Manifying blib/man3/Error::Simple.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Error-0.17012'
Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Backend.pm line 395
*** Error installation cancelled.
*** Installing Devel::StackTrace...
[MSG] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DR/DROLSKY/CHECKSUMS'
[MSG] Checksum matches for 'Devel-StackTrace-1.16.tar.gz'
[MSG] Extracted 'Devel-StackTrace-1.16/'
[MSG] Extracted 'Devel-StackTrace-1.16/t/'
[MSG] Extracted 'Devel-StackTrace-1.16/t/01-basic.t'
[MSG] Extracted 'Devel-StackTrace-1.16/t/pod.t'
[MSG] Extracted 'Devel-StackTrace-1.16/t/pod-coverage.t'
[MSG] Extracted 'Devel-StackTrace-1.16/t/kwalitee.t'
[MSG] Extracted 'Devel-StackTrace-1.16/META.yml'
[MSG] Extracted 'Devel-StackTrace-1.16/Changes'
[MSG] Extracted 'Devel-StackTrace-1.16/README'
[MSG] Extracted 'Devel-StackTrace-1.16/MANIFEST'
[MSG] Extracted 'Devel-StackTrace-1.16/Makefile.PL'
[MSG] Extracted 'Devel-StackTrace-1.16/lib/'
[MSG] Extracted 'Devel-StackTrace-1.16/lib/Devel/'
[MSG] Extracted 'Devel-StackTrace-1.16/lib/Devel/StackTrace.pm'
[MSG] Extracted 'Devel-StackTrace-1.16/SIGNATURE'
[MSG] Extracted 'Devel-StackTrace-1.16/LICENSE'
[MSG] Extracted 'Devel-StackTrace-1.16/Build.PL'
[MSG] Extracted 'Devel::StackTrace' to '/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
WARNING: This key is not certified with a trusted signature!
Primary key fingerprint: 6E6F 1E40 8E80 6724 C116 8028 DCEA F767 342E 89F3
Running [/opt/perl/5.10.0/bin/perl /opt/perl/testers/bin/cpanp-run-perl /opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16/Makefile.PL ]...
Writing Makefile for Devel::StackTrace
Running [/usr/bin/make -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
Manifying blib/man3/Devel::StackTrace.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
Running [/usr/bin/make test -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-basic..........ok
t/kwalitee..........skipped: This test is only run for the module author
t/pod-coverage......skipped: This test is only run for the module author
t/pod...............skipped: This test is only run for the module author
All tests successful.
Files=4, Tests=34, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.13 cusr 0.03 csys = 0.21 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
[MSG] MAKE TEST passed: make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-basic..........ok
t/kwalitee..........skipped: This test is only run for the module author
t/pod-coverage......skipped: This test is only run for the module author
t/pod...............skipped: This test is only run for the module author
All tests successful.
Files=4, Tests=34, 0 wallclock secs ( 0.03 usr 0.02 sys + 0.13 cusr 0.03 csys = 0.21 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
Already tried to use 'YAML::Tiny', which was unsuccessful [THIS MAY BE A PROBLEM!] at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Internals/Report.pm line 96
[ERROR] You don't have 'Test::Reporter' (or modules required by 'Test::Reporter') installed, you cannot report test results.
[ERROR] Failed to send test report for 'Devel::StackTrace'
Running [/usr/bin/make install -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0/Devel'
mkdir /opt/perl/5.10.0/lib/site_perl/5.10.0/Devel: ©Úµ´¤£²ÅÅvªº¾Þ§@ at /opt/perl/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 479
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0/Devel'
mkdir /opt/perl/5.10.0/lib/site_perl/5.10.0/Devel: ©Úµ´¤£²ÅÅvªº¾Þ§@ at /opt/perl/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 479
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Devel-StackTrace-1.16'
Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Backend.pm line 395
*** Devel::StackTrace installation cancelled.
*** Installing Params::Validate...
[MSG] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DR/DROLSKY/CHECKSUMS'
[MSG] Checksum matches for 'Params-Validate-0.89.tar.gz'
[MSG] Extracted 'Params-Validate-0.89/'
[MSG] Extracted 'Params-Validate-0.89/t/'
[MSG] Extracted 'Params-Validate-0.89/t/13-taint.t'
[MSG] Extracted 'Params-Validate-0.89/t/09-regex.t'
[MSG] Extracted 'Params-Validate-0.89/t/14-no_validate.t'
[MSG] Extracted 'Params-Validate-0.89/t/03-attribute.t'
[MSG] Extracted 'Params-Validate-0.89/t/18-depends.t'
[MSG] Extracted 'Params-Validate-0.89/t/06-options.t'
[MSG] Extracted 'Params-Validate-0.89/t/04-defaults.t'
[MSG] Extracted 'Params-Validate-0.89/t/25-undef-regex.t'
[MSG] Extracted 'Params-Validate-0.89/t/23-readonly.t'
[MSG] Extracted 'Params-Validate-0.89/t/27-string-as-type.t'
[MSG] Extracted 'Params-Validate-0.89/t/08-noop_with.t'
[MSG] Extracted 'Params-Validate-0.89/t/05-noop_default.t'
[MSG] Extracted 'Params-Validate-0.89/t/pod.t'
[MSG] Extracted 'Params-Validate-0.89/t/21-can.t'
[MSG] Extracted 'Params-Validate-0.89/t/22-overload-can-bug.t'
[MSG] Extracted 'Params-Validate-0.89/t/15-case.t'
[MSG] Extracted 'Params-Validate-0.89/t/01-validate.t'
[MSG] Extracted 'Params-Validate-0.89/t/10-noop_regex.t'
[MSG] Extracted 'Params-Validate-0.89/t/17-callbacks.t'
[MSG] Extracted 'Params-Validate-0.89/t/lib/'
[MSG] Extracted 'Params-Validate-0.89/t/lib/PVTests.pm'
[MSG] Extracted 'Params-Validate-0.89/t/lib/PVTests/'
[MSG] Extracted 'Params-Validate-0.89/t/lib/PVTests/Regex.pm'
[MSG] Extracted 'Params-Validate-0.89/t/lib/PVTests/With.pm'
[MSG] Extracted 'Params-Validate-0.89/t/lib/PVTests/Standard.pm'
[MSG] Extracted 'Params-Validate-0.89/t/lib/PVTests/Callbacks.pm'
[MSG] Extracted 'Params-Validate-0.89/t/lib/PVTests/Defaults.pm'
[MSG] Extracted 'Params-Validate-0.89/t/19-untaint.t'
[MSG] Extracted 'Params-Validate-0.89/t/02-noop.t'
[MSG] Extracted 'Params-Validate-0.89/t/pod-coverage.t'
[MSG] Extracted 'Params-Validate-0.89/t/07-with.t'
[MSG] Extracted 'Params-Validate-0.89/t/24-tied.t'
[MSG] Extracted 'Params-Validate-0.89/t/11-cb.t'
[MSG] Extracted 'Params-Validate-0.89/t/16-normalize.t'
[MSG] Extracted 'Params-Validate-0.89/t/12-noop_cb.t'
[MSG] Extracted 'Params-Validate-0.89/t/26-isa.t'
[MSG] Extracted 'Params-Validate-0.89/META.yml'
[MSG] Extracted 'Params-Validate-0.89/Changes'
[MSG] Extracted 'Params-Validate-0.89/README'
[MSG] Extracted 'Params-Validate-0.89/TODO'
[MSG] Extracted 'Params-Validate-0.89/MANIFEST'
[MSG] Extracted 'Params-Validate-0.89/Makefile.PL'
[MSG] Extracted 'Params-Validate-0.89/Validate.xs'
[MSG] Extracted 'Params-Validate-0.89/ppport.h'
[MSG] Extracted 'Params-Validate-0.89/lib/'
[MSG] Extracted 'Params-Validate-0.89/lib/Params/'
[MSG] Extracted 'Params-Validate-0.89/lib/Params/ValidateXS.pm'
[MSG] Extracted 'Params-Validate-0.89/lib/Params/Validate.pm'
[MSG] Extracted 'Params-Validate-0.89/lib/Params/ValidatePP.pm'
[MSG] Extracted 'Params-Validate-0.89/lib/Attribute/'
[MSG] Extracted 'Params-Validate-0.89/lib/Attribute/Params/'
[MSG] Extracted 'Params-Validate-0.89/lib/Attribute/Params/Validate.pm'
[MSG] Extracted 'Params-Validate-0.89/LICENSE'
[MSG] Extracted 'Params::Validate' to '/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
==> MISSING Signature file! <==
Running [/opt/perl/5.10.0/bin/perl /opt/perl/testers/bin/cpanp-run-perl /opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89/Makefile.PL ]...
Testing if you have a C compiler
Writing Makefile for Params::Validate
Running [/usr/bin/make -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"0.89\" -DXS_VERSION=\"0.89\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" Validate.c
Running Mkbootstrap for Params::Validate ()
chmod 644 Validate.bs
cp Validate.bs blib/arch/auto/Params/Validate/Validate.bs
chmod 644 blib/arch/auto/Params/Validate/Validate.bs
rm -f blib/arch/auto/Params/Validate/Validate.so
gcc -shared -g -O3 -L/usr/local/lib Validate.o -o blib/arch/auto/Params/Validate/Validate.so \
\
chmod 755 blib/arch/auto/Params/Validate/Validate.so
Manifying blib/man3/Params::ValidatePP.3
Manifying blib/man3/Attribute::Params::Validate.3
Manifying blib/man3/Params::Validate.3
Manifying blib/man3/Params::ValidateXS.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
Running [/usr/bin/make test -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-validate..............ok
t/02-noop..................ok
t/03-attribute.............ok
t/04-defaults..............ok
t/05-noop_default..........ok
t/06-options...............ok
t/07-with..................ok
t/08-noop_with.............ok
t/09-regex.................ok
t/10-noop_regex............ok
t/11-cb....................ok
t/12-noop_cb...............ok
t/13-taint.................ok
t/14-no_validate...........ok
t/15-case..................ok
t/16-normalize.............ok
t/17-callbacks.............ok
t/18-depends...............ok
t/19-untaint...............skipped: These tests require Test::Taint 0.02+ to run
t/21-can...................ok
t/22-overload-can-bug......ok
t/23-readonly..............skipped: Need Readonly::XS and Readonly for this test
t/24-tied..................ok
t/25-undef-regex...........ok
t/26-isa...................ok
t/27-string-as-type........ok
t/pod-coverage.............skipped: This test is only run for the module author
t/pod......................skipped: This test is only run for the module author
All tests successful.
Files=28, Tests=486, 2 wallclock secs ( 0.19 usr 0.03 sys + 1.44 cusr 0.23 csys = 1.89 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
[MSG] MAKE TEST passed: make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-validate..............ok
t/02-noop..................ok
t/03-attribute.............ok
t/04-defaults..............ok
t/05-noop_default..........ok
t/06-options...............ok
t/07-with..................ok
t/08-noop_with.............ok
t/09-regex.................ok
t/10-noop_regex............ok
t/11-cb....................ok
t/12-noop_cb...............ok
t/13-taint.................ok
t/14-no_validate...........ok
t/15-case..................ok
t/16-normalize.............ok
t/17-callbacks.............ok
t/18-depends...............ok
t/19-untaint...............skipped: These tests require Test::Taint 0.02+ to run
t/21-can...................ok
t/22-overload-can-bug......ok
t/23-readonly..............skipped: Need Readonly::XS and Readonly for this test
t/24-tied..................ok
t/25-undef-regex...........ok
t/26-isa...................ok
t/27-string-as-type........ok
t/pod-coverage.............skipped: This test is only run for the module author
t/pod......................skipped: This test is only run for the module author
All tests successful.
Files=28, Tests=486, 2 wallclock secs ( 0.19 usr 0.03 sys + 1.44 cusr 0.23 csys = 1.89 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
Already tried to use 'YAML::Tiny', which was unsuccessful [THIS MAY BE A PROBLEM!] at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Internals/Report.pm line 96
[ERROR] You don't have 'Test::Reporter' (or modules required by 'Test::Reporter') installed, you cannot report test results.
[ERROR] Failed to send test report for 'Params::Validate'
Running [/usr/bin/make install -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld/Attribute/Params'
mkdir /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld/Attribute: ©Úµ´¤£²ÅÅvªº¾Þ§@ at /opt/perl/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 479
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld/Attribute/Params'
mkdir /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld/Attribute: ©Úµ´¤£²ÅÅvªº¾Þ§@ at /opt/perl/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 479
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/Params-Validate-0.89'
Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Backend.pm line 395
*** Params::Validate installation cancelled.
*** Installing XML::DOM...
[MSG] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/T/TJ/TJMATHER/CHECKSUMS'
[MSG] Checksum matches for 'XML-DOM-1.44.tar.gz'
[MSG] Extracted 'XML-DOM-1.44/'
[MSG] Extracted 'XML-DOM-1.44/lib/'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/DocumentType.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/DocumentFragment.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/AttlistDecl.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Notation.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Attr.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/ProcessingInstruction.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Entity.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Document.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Parser.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/NodeList.pm'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Node.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/ElementDecl.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/EntityReference.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/NodeList.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/CharacterData.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/DOMException.pm'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/PerlSAX.pm'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/NamedNodeMap.pm'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/NamedNodeMap.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Comment.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Element.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/XMLDecl.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/CDATASection.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/DOMImplementation.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/Text.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM/AttDef.pod'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/DOM.pm'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/Handler/'
[MSG] Extracted 'XML-DOM-1.44/lib/XML/Handler/BuildDOM.pm'
[MSG] Extracted 'XML-DOM-1.44/t/'
[MSG] Extracted 'XML-DOM-1.44/t/dom_jp_minus.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_noexpand.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_template.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_jp_cdata.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_jp_modify.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_text.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_cdata.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_jp_attr.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_extent.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_minus.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_attr.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_encode.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_jp_example.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_extent.ent'
[MSG] Extracted 'XML-DOM-1.44/t/dom_jp_print.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_documenttype.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_extent.dtd'
[MSG] Extracted 'XML-DOM-1.44/t/dom_jp_astress.t'
[MSG] Extracted 'XML-DOM-1.44/t/build_dom.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_print.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_astress.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_modify.t'
[MSG] Extracted 'XML-DOM-1.44/t/dom_example.t'
[MSG] Extracted 'XML-DOM-1.44/FAQ.xml'
[MSG] Extracted 'XML-DOM-1.44/Changes'
[MSG] Extracted 'XML-DOM-1.44/MANIFEST'
[MSG] Extracted 'XML-DOM-1.44/META.yml'
[MSG] Extracted 'XML-DOM-1.44/CmpDOM.pm'
[MSG] Extracted 'XML-DOM-1.44/samples/'
[MSG] Extracted 'XML-DOM-1.44/samples/minutes.xml'
[MSG] Extracted 'XML-DOM-1.44/samples/REC-xml-19980210.xml'
[MSG] Extracted 'XML-DOM-1.44/BUGS'
[MSG] Extracted 'XML-DOM-1.44/CheckAncestors.pm'
[MSG] Extracted 'XML-DOM-1.44/XML-Parser-2.31.patch'
[MSG] Extracted 'XML-DOM-1.44/Makefile.PL'
[MSG] Extracted 'XML-DOM-1.44/README'
[MSG] Extracted 'XML::DOM' to '/opt/perl/testers/.cpanplus/5.10.0/build/XML-DOM-1.44'
==> MISSING Signature file! <==
Running [/opt/perl/5.10.0/bin/perl /opt/perl/testers/bin/cpanp-run-perl /opt/perl/testers/.cpanplus/5.10.0/build/XML-DOM-1.44/Makefile.PL ]...
Warning: prerequisite XML::Parser 2.30 not found.
Warning: prerequisite XML::Parser::PerlSAX 0.07 not found.
Warning: prerequisite XML::RegExp 0 not found.
Writing Makefile for XML-DOM
[MSG] Module 'XML::DOM' requires 'XML::Parser' version '2.30' to be installed
[MSG] Module 'XML::DOM' requires 'XML::Parser::PerlSAX' version '0.07' to be installed
[MSG] Module 'XML::DOM' requires 'XML::RegExp' version '0' to be installed
[MSG] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MS/MSERGEANT/CHECKSUMS'
[MSG] Checksum matches for 'XML-Parser-2.36.tar.gz'
[MSG] Extracted 'XML-Parser-2.36/'
[MSG] Extracted 'XML-Parser-2.36/Changes'
[MSG] Extracted 'XML-Parser-2.36/Expat/'
[MSG] Extracted 'XML-Parser-2.36/Expat/encoding.h'
[MSG] Extracted 'XML-Parser-2.36/Expat/Expat.pm'
[MSG] Extracted 'XML-Parser-2.36/Expat/Expat.xs'
[MSG] Extracted 'XML-Parser-2.36/Expat/Makefile.PL'
[MSG] Extracted 'XML-Parser-2.36/Expat/typemap'
[MSG] Extracted 'XML-Parser-2.36/Makefile.PL'
[MSG] Extracted 'XML-Parser-2.36/MANIFEST'
[MSG] Extracted 'XML-Parser-2.36/META.yml'
[MSG] Extracted 'XML-Parser-2.36/Parser/'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/big5.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/euc-kr.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/iso-8859-2.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/iso-8859-3.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/iso-8859-4.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/iso-8859-5.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/iso-8859-7.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/iso-8859-8.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/iso-8859-9.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/Japanese_Encodings.msg'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/README'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/windows-1250.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/windows-1252.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/x-euc-jp-jisx0221.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/x-euc-jp-unicode.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/x-sjis-cp932.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/x-sjis-jdk117.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/x-sjis-jisx0221.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/Encodings/x-sjis-unicode.enc'
[MSG] Extracted 'XML-Parser-2.36/Parser/LWPExternEnt.pl'
[MSG] Extracted 'XML-Parser-2.36/Parser/Style/'
[MSG] Extracted 'XML-Parser-2.36/Parser/Style/Debug.pm'
[MSG] Extracted 'XML-Parser-2.36/Parser/Style/Objects.pm'
[MSG] Extracted 'XML-Parser-2.36/Parser/Style/Stream.pm'
[MSG] Extracted 'XML-Parser-2.36/Parser/Style/Subs.pm'
[MSG] Extracted 'XML-Parser-2.36/Parser/Style/Tree.pm'
[MSG] Extracted 'XML-Parser-2.36/Parser.pm'
[MSG] Extracted 'XML-Parser-2.36/README'
[MSG] Extracted 'XML-Parser-2.36/samples/'
[MSG] Extracted 'XML-Parser-2.36/samples/canonical'
[MSG] Extracted 'XML-Parser-2.36/samples/canontst.xml'
[MSG] Extracted 'XML-Parser-2.36/samples/ctest.dtd'
[MSG] Extracted 'XML-Parser-2.36/samples/REC-xml-19980210.xml'
[MSG] Extracted 'XML-Parser-2.36/samples/xmlcomments'
[MSG] Extracted 'XML-Parser-2.36/samples/xmlfilter'
[MSG] Extracted 'XML-Parser-2.36/samples/xmlstats'
[MSG] Extracted 'XML-Parser-2.36/t/'
[MSG] Extracted 'XML-Parser-2.36/t/astress.t'
[MSG] Extracted 'XML-Parser-2.36/t/cdata.t'
[MSG] Extracted 'XML-Parser-2.36/t/decl.t'
[MSG] Extracted 'XML-Parser-2.36/t/defaulted.t'
[MSG] Extracted 'XML-Parser-2.36/t/encoding.t'
[MSG] Extracted 'XML-Parser-2.36/t/ext.ent'
[MSG] Extracted 'XML-Parser-2.36/t/ext2.ent'
[MSG] Extracted 'XML-Parser-2.36/t/external_ent.t'
[MSG] Extracted 'XML-Parser-2.36/t/file.t'
[MSG] Extracted 'XML-Parser-2.36/t/finish.t'
[MSG] Extracted 'XML-Parser-2.36/t/foo.dtd'
[MSG] Extracted 'XML-Parser-2.36/t/namespaces.t'
[MSG] Extracted 'XML-Parser-2.36/t/parament.t'
[MSG] Extracted 'XML-Parser-2.36/t/partial.t'
[MSG] Extracted 'XML-Parser-2.36/t/skip.t'
[MSG] Extracted 'XML-Parser-2.36/t/stream.t'
[MSG] Extracted 'XML-Parser-2.36/t/styles.t'
[MSG] Extracted 'XML::Parser' to '/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
==> MISSING Signature file! <==
Running [/opt/perl/5.10.0/bin/perl /opt/perl/testers/bin/cpanp-run-perl /opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Makefile.PL ]...
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
Running [/usr/bin/make -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
make[2]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
gcc -c -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"2.36\" -DXS_VERSION=\"2.36\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" Expat.c
Running Mkbootstrap for XML::Parser::Expat ()
chmod 644 Expat.bs
cp Expat.bs ../blib/arch/auto/XML/Parser/Expat/Expat.bs
chmod 644 ../blib/arch/auto/XML/Parser/Expat/Expat.bs
rm -f ../blib/arch/auto/XML/Parser/Expat/Expat.so
LD_RUN_PATH="/usr/lib" gcc -shared -g -O3 -L/usr/local/lib Expat.o -o ../blib/arch/auto/XML/Parser/Expat/Expat.so \
-lexpat \
chmod 755 ../blib/arch/auto/XML/Parser/Expat/Expat.so
Manifying ../blib/man3/XML::Parser::Expat.3
make[2]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
Manifying blib/man3/XML::Parser::Style::Objects.3
Manifying blib/man3/XML::Parser::Style::Debug.3
Manifying blib/man3/XML::Parser.3
Manifying blib/man3/XML::Parser::Style::Subs.3
Manifying blib/man3/XML::Parser::Style::Tree.3
Manifying blib/man3/XML::Parser::Style::Stream.3
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
Running [/usr/bin/make test -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
make[2]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
make[2]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/astress...........ok
t/cdata.............ok
t/decl..............ok
t/defaulted.........ok
t/encoding..........ok
t/external_ent......ok
t/file..............ok
t/finish............ok
t/namespaces........ok
t/parament..........ok
t/partial...........ok
t/skip..............ok
t/stream............ok
t/styles............ok
All tests successful.
Files=14, Tests=130, 1 wallclock secs ( 0.06 usr 0.01 sys + 0.76 cusr 0.15 csys = 0.98 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
[MSG] MAKE TEST passed: make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
make[2]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
make[2]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/astress...........ok
t/cdata.............ok
t/decl..............ok
t/defaulted.........ok
t/encoding..........ok
t/external_ent......ok
t/file..............ok
t/finish............ok
t/namespaces........ok
t/parament..........ok
t/partial...........ok
t/skip..............ok
t/stream............ok
t/styles............ok
All tests successful.
Files=14, Tests=130, 1 wallclock secs ( 0.06 usr 0.01 sys + 0.76 cusr 0.15 csys = 0.98 CPU)
Result: PASS
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
Already tried to use 'YAML::Tiny', which was unsuccessful [THIS MAY BE A PROBLEM!] at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Internals/Report.pm line 96
[ERROR] You don't have 'Test::Reporter' (or modules required by 'Test::Reporter') installed, you cannot report test results.
[ERROR] Failed to send test report for 'XML::Parser'
Running [/usr/bin/make install -j 2]...
make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
make[2]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld/XML'
mkdir /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld/XML: ©Úµ´¤£²ÅÅvªº¾Þ§@ at /opt/perl/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 479
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
[ERROR] MAKE INSTALL failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) make[1]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
Appending installation info to /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod
/bin/sh: /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/perllocal.pod: ©Úµ´¤£²ÅÅvªº¾Þ§@
make[1]: [doc_site_install] Error 1 (ignored)
make[2]: Entering directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
ERROR: Can't create '/opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld/XML'
mkdir /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld/XML: ©Úµ´¤£²ÅÅvªº¾Þ§@ at /opt/perl/5.10.0/lib/5.10.0/ExtUtils/Install.pm line 479
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
at -e line 1
make[1]: *** [pure_site_install] Error 13
make[1]: *** Waiting for unfinished jobs....
make[2]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36/Expat'
make[1]: Leaving directory `/opt/perl/testers/.cpanplus/5.10.0/build/XML-Parser-2.36'
[ERROR] Failed to install 'XML::Parser' as prerequisite for 'XML::DOM'
[ERROR] Unable to satisfy prerequisites for 'XML::DOM' -- aborting install
[ERROR] Unable to create a new distribution object for 'XML::DOM' -- cannot continue
Key 'ok' () is of invalid type for 'CPANPLUS::Backend::RV::new' provided by CPANPLUS::Backend::__ANON__ at /opt/perl/5.10.0/lib/5.10.0/CPANPLUS/Backend.pm line 395
*** XML::DOM installation cancelled.
*** Installing Log::Dispatch...
[MSG] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/D/DR/DROLSKY/CHECKSUMS'
[MSG] Checksum matches for 'Log-Dispatch-2.21.tar.gz'
[MSG] Extracted 'Log-Dispatch-2.21/'
[MSG] Extracted 'Log-Dispatch-2.21/t/'
[MSG] Extracted 'Log-Dispatch-2.21/t/01-basic.t'
[MSG] Extracted 'Log-Dispatch-2.21/t/pod.t'
[MSG] Extracted 'Log-Dispatch-2.21/t/00-compile.t'
[MSG] Extracted 'Log-Dispatch-2.21/t/pod-coverage.t'
[MSG] Extracted 'Log-Dispatch-2.21/t/kwalitee.t'
[MSG] Extracted 'Log-Dispatch-2.21/META.yml'
[MSG] Extracted 'Log-Dispatch-2.21/Changes'
[MSG] Extracted 'Log-Dispatch-2.21/README'
[MSG] Extracted 'Log-Dispatch-2.21/MANIFEST'
[MSG] Extracted 'Log-Dispatch-2.21/Makefile.PL'
[MSG] Extracted 'Log-Dispatch-2.21/lib/'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/File/'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/File/Locked.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Null.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/ApacheLog.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Email.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Screen.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Base.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/File.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Handle.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Syslog.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Email/'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Email/MailSendmail.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Email/MailSender.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Email/MIMELite.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Email/MailSend.pm'
[MSG] Extracted 'Log-Dispatch-2.21/lib/Log/Dispatch/Output.pm'
[MSG] Extracted 'Log-Dispatch-2.21/SIGNATURE'
[MSG] Extracted 'Log-Dispatch-2.21/LICENSE'
[MSG] Extracted 'Log-Dispatch-2.21/Build.PL'
[MSG] Extracted 'Log::Dispatch' to '/opt/perl/testers/.cpanplus/5.10.0/build/Log-Disp
[Output truncated after 50K]
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = zh_TW
LANGUAGE = zh_TW
LC_ALL = zh_TW
LC_COLLATE = zh_TW
LC_CTYPE = zh_TW
LC_MESSAGES = zh_TW
LC_MONETARY = zh_TW
LC_NUMERIC = zh_TW
LC_TIME = zh_TW
PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
PERL5LIB = /home/imacat/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 25846
PERL5_CPAN_IS_RUNNING = 25846
SHELL = /bin/zsh
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /opt/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
$EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.42
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.19
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.09
Test::More 0.75
YAML 0.66
YAML::Syck n/a
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'
-
FAIL OpenPlugin-0.11 x86_64-linux-thread-multi-ld 2.6.22.10
by imacat