develooper Front page | perl.cpan.testers | Postings from February 2008

FAIL B-Generate-1.12_05 alpha-linux-thread-multi2.6.18-5-alpha-generic

From:
chris
Date:
February 25, 2008 12:10
Subject:
FAIL B-Generate-1.12_05 alpha-linux-thread-multi2.6.18-5-alpha-generic
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear JCROMIE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Feb 25 20:09:32 2008] Trying to get 'http://www.cpan.org/authors/id/J/JC/JCROMIE/B-Generate-1.12_05.tar.gz'
[MSG] [Mon Feb 25 20:09:36 2008] Trying to get 'http://www.cpan.org/authors/id/J/JC/JCROMIE/CHECKSUMS'
[MSG] [Mon Feb 25 20:09:36 2008] Checksum matches for 'B-Generate-1.12_05.tar.gz'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/Changes'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/lib/'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/lib/B/'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/lib/B/Generate.pm'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/lib/B/Generate.xs'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/META.yml'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/MANIFEST'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/Copying'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/t/'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/t/op_list.t'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/t/basic.t'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/t/op_list_bgen.t'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/t/inspect-this.t'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/t/inspect-btest.t'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/Build.PL'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/typemap'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/Makefile.PL'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/Artistic'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B-Generate-1.12_05/BTest.pm'
[MSG] [Mon Feb 25 20:09:37 2008] Extracted 'B::Generate' to '/home/chris/blead/.cpanplus/5.11.0/build/B-Generate-1.12_05'
[MSG] [Mon Feb 25 20:09:39 2008] # running Build.PL 
/home/chris/blead/bin/perl5.11.0 Build.PL
Creating custom builder _build/lib/My/Builder.pm in _build/lib/My
Checking whether your kit is complete...
Looks good

Checking prerequisites...
Looks good

Creating new 'Build' script for 'B-Generate' version '1.12_05'
Unknown 'build_class', defaulting to 'Module::Build'

[MSG] [Mon Feb 25 20:09:39 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Feb 25 20:09:53 2008] /home/chris/blead/bin/perl5.11.0 Build --makefile_env_macros 1
Copying lib/B/Generate.pm -> blib/lib/B/Generate.pm
lib/B/Generate.xs -> lib/B/Generate.c
cc -I/home/chris/blead/lib/perl5/5.11.0/alpha-linux-thread-multi/CORE -fPIC -DPERL_CUSTOM_OPS -DPERL_CUSTOM_OPCODES -g -c -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -o lib/B/Generate.o lib/B/Generate.c
ExtUtils::Mkbootstrap::Mkbootstrap('blib/arch/auto/B/Generate/Generate.bs')
cc -shared -O2 -L/usr/local/lib -o blib/arch/auto/B/Generate/Generate.so lib/B/Generate.o
Manifying blib/lib/B/Generate.pm -> blib/libdoc/B::Generate.3

[ERROR] [Mon Feb 25 20:10:00 2008] MAKE TEST failed: Illegal seek /home/chris/blead/bin/perl5.11.0 Build --makefile_env_macros 1 test
t/basic..............ok
t/inspect-btest......
#   Failed test '->LEN 0'
#   at BTest.pm line 118.

#   Failed test '->LEN 0'
#   at BTest.pm line 118.
# Looks like you failed 2 tests of 584.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 2/584 subtests 
t/inspect-this.......ok
t/op_list............ok
t/op_list_bgen.......ok

Test Summary Report
-------------------
t/inspect-btest.t (Wstat: 512 Tests: 584 Failed: 2)
  Failed tests:  251, 481
  Non-zero exit status: 2
Files=5, Tests=863,  4 wallclock secs ( 0.91 usr  0.05 sys +  2.86 cusr  0.13 csys =  3.96 CPU)
Result: FAIL
Failed 1/5 test programs. 2/863 subtests failed.
make: *** [test] Error 255

[MSG] [Mon Feb 25 20:10:00 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  B                                  1.19     1.09
	  ExtUtils::CBuilder              0.22_01        0
	  Module::Build                  0.2808_02        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
    PERL5LIB = :/home/chris/blead/.cpanplus/5.11.0/build/B-Generate-1.12_05/blib/lib:/home/chris/blead/.cpanplus/5.11.0/build/B-Generate-1.12_05/blib/arch:/home/chris/blead/.cpanplus/5.11.0/build/B-Generate-1.12_05/blib
    PERL5_CPANPLUS_IS_RUNNING = 8222
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen.linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/chris/blead/bin/perl5.11.0
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 20 24 25 29 44 46 1000
    EGID: $)  = 1000 20 24 25 29 44 46 1000


-------------------------------


--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 33365) configuration:
  Platform:
    osname=linux, osvers=2.6.18-5-alpha-generic, archname=alpha-linux-thread-multi
    uname='linux debbie 2.6.18-5-alpha-generic #1 tue oct 2 23:07:38 utc 2007 alpha gnulinux '
    config_args='-e -Dusedevel -Dprefix=/home/chris/blead -Dusethreads -Dusemymalloc=n -d'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About