develooper Front page | perl.cpan.testers | Postings from February 2008

FAIL Net-Address-Ethernet-1.109 x86_64-linux 2.6.23.1-slh64-smp-32

From:
DEVOGON
Date:
February 24, 2008 07:28
Subject:
FAIL Net-Address-Ethernet-1.109 x86_64-linux 2.6.23.1-slh64-smp-32
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear MTHURN,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Feb 24 16:24:41 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MT/MTHURN/Net-Address-Ethernet-1.109.tar.gz'
[MSG] [Sun Feb 24 16:24:42 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MT/MTHURN/CHECKSUMS'
[MSG] [Sun Feb 24 16:24:42 2008] Checksum matches for 'Net-Address-Ethernet-1.109.tar.gz'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/Changes'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install/'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install/Base.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install/Can.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install/Fetch.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install/Makefile.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install/Metadata.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install/Win32.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install/WriteAll.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/inc/Module/Install.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/lib/'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/lib/Net/'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/lib/Net/Address/'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/lib/Net/Address/Ethernet.pm'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/Makefile.PL'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/MANIFEST'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/META.yml'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/README'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/t/'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/t/import_0.t'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/t/import_all.t'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/t/import_ga.t'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/t/normal.t'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/t/pod-coverage.t'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net-Address-Ethernet-1.109/t/pod.t'
[MSG] [Sun Feb 24 16:24:42 2008] Extracted 'Net::Address::Ethernet' to '/home/d/.cpanplus/5.10.0/build/Net-Address-Ethernet-1.109'
[MSG] [Sun Feb 24 16:24:43 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Net::Ifconfig::Wrapper 0 not found.
Writing Makefile for Net::Address::Ethernet

[MSG] [Sun Feb 24 16:24:43 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Feb 24 16:24:43 2008] Module 'Net::Address::Ethernet' requires 'Net::Ifconfig::Wrapper' version '0' to be installed 
[MSG] [Sun Feb 24 16:24:44 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/T/TP/TPABA/Net-Ifconfig-Wrapper/CHECKSUMS'
[MSG] [Sun Feb 24 16:24:44 2008] Checksum matches for 'Net-Ifconfig-Wrapper-0.09.tar.gz'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/Changes'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/contrib/'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/contrib/uni-ifconfig.pl'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/contrib/Win32-list-ifaces.pl'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/Makefile.PL'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/MANIFEST'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/README'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/test.pl'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net-Ifconfig-Wrapper-0.09/Wrapper.pm'
[MSG] [Sun Feb 24 16:24:44 2008] Extracted 'Net::Ifconfig::Wrapper' to '/home/d/.cpanplus/5.10.0/build/Net-Ifconfig-Wrapper-0.09'
[MSG] [Sun Feb 24 16:24:45 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Net::Ifconfig::Wrapper

[MSG] [Sun Feb 24 16:24:45 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Feb 24 16:24:46 2008] cp Wrapper.pm blib/lib/Net/Ifconfig/Wrapper.pm
Manifying blib/man3/Net::Ifconfig::Wrapper.3

[MSG] [Sun Feb 24 16:25:34 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/local/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..5
# Running under perl version 5.010000 for linux
# Current time local: Sun Feb 24 16:24:46 2008
# Current time GMT:   Sun Feb 24 15:24:46 2008
# Using Test.pm version 1.25
Loading Net::Ifconfig::Wrapper........ok 1
Geting information about interfaces...ok 2

== '/sbin/ifconfig -a' command output ==
eth0      Link encap:Ethernet  HWaddr 00:16:36:ea:6b:fc  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:20 Base address:0x4000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:48315 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48315 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:6927659 (6.6 MiB)  TX bytes:6927659 (6.6 MiB)

wlan0     Link encap:Ethernet  HWaddr 00:1b:11:0d:42:8b  
          inet addr:192.168.62.54  Bcast:192.168.62.255  Mask:255.255.255.0
          inet6 addr: fe80::21b:11ff:fe0d:428b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:33718 errors:0 dropped:0 overruns:0 frame:0
          TX packets:30260 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:28108152 (26.8 MiB)  TX bytes:3371947 (3.2 MiB)

wmaster0  Link encap:UNSPEC  HWaddr 00-1B-11-0D-42-8B-00-00-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

======================================

== Net::Ifconfig::Wrapper info output ==
eth0:	UP
	ether 00:16:36:ea:6b:fc
lo:	UP
	inet 127.0.0.1       mask 255.0.0.0
wlan0:	UP
	inet 192.168.62.54   mask 255.255.255.0
	ether 00:1b:11:0d:42:8b
wmaster0:	UP
======================================
Is Net::Ifconfig::Wrapper info output correct? Y/N:
Information displayed correctly.......ok 3
add/remove alias function tests (4,5) skipped: insufficient privileges

[MSG] [Sun Feb 24 16:25:34 2008] Sending test report for 'Net-Ifconfig-Wrapper-0.09'
[MSG] [Sun Feb 24 16:25:34 2008] Ok, not sending test report
[MSG] [Sun Feb 24 16:25:36 2008] cp lib/Net/Address/Ethernet.pm blib/lib/Net/Address/Ethernet.pm
Manifying blib/man3/Net::Address::Ethernet.3

[ERROR] [Sun Feb 24 16:25:38 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/import_0..........Variable "$s" is not available at (re_eval 27) line 1.
Variable "$x" is not available at (re_eval 27) line 1.
ok
t/import_all........Variable "$s" is not available at (re_eval 27) line 1.
Variable "$x" is not available at (re_eval 27) line 1.
Use of uninitialized value in string eq at /home/d/.cpanplus/5.10.0/build/Net-Address-Ethernet-1.109/blib/lib/Net/Address/Ethernet.pm line 83.
ok
t/import_ga.........Variable "$s" is not available at (re_eval 27) line 1.
Variable "$x" is not available at (re_eval 27) line 1.
Use of uninitialized value in string eq at /home/d/.cpanplus/5.10.0/build/Net-Address-Ethernet-1.109/blib/lib/Net/Address/Ethernet.pm line 83.
ok
t/normal............Variable "$s" is not available at (re_eval 27) line 1.
Variable "$x" is not available at (re_eval 27) line 1.
Use of uninitialized value in string eq at /home/d/.cpanplus/5.10.0/build/Net-Address-Ethernet-1.109/blib/lib/Net/Address/Ethernet.pm line 83.

#   Failed test 'not empty'
#   at t/normal.t line 9.
#     ''
#         ne
#     ''

#   Failed test 'looks like an address'
#   at t/normal.t line 10.
# FYI, your ethernet address is 
Use of uninitialized value in string eq at /home/d/.cpanplus/5.10.0/build/Net-Address-Ethernet-1.109/blib/lib/Net/Address/Ethernet.pm line 83.
# in integer bytes, that's 

#   Failed test 'got 6 bytes'
#   at t/normal.t line 23.
#          got: '0'
#     expected: '6'

#   Failed test 'got an Ethernet address'
#   at t/normal.t line 28.
# Looks like you failed 4 tests of 28.
 Dubious, test returned 4 (wstat 1024, 0x400)
 Failed 4/28 subtests 
t/pod-coverage......Variable "$s" is not available at (re_eval 32) line 1.
Variable "$x" is not available at (re_eval 32) line 1.
ok
t/pod...............ok

Test Summary Report
-------------------
t/normal.t      (Wstat: 1024 Tests: 28 Failed: 4)
  Failed tests:  3-4, 6, 9
  Non-zero exit status: 4
Files=6, Tests=39,  2 wallclock secs ( 0.04 usr  0.02 sys +  0.93 cusr  0.99 csys =  1.98 CPU)
Result: FAIL
Failed 1/6 test programs. 4/39 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Sun Feb 24 16:25:38 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Net::Domain                        2.20        0
	  Net::Ifconfig::Wrapper             0.09        0
	  Regexp::Common                    2.120        0
	  Sys::Hostname                      1.11        0
	  Test::More                         0.74        0
	  Test::Pod                          1.26        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.23.1-slh64-smp-32, archname=x86_64-linux
    uname='linux sanremo.defietser 2.6.23.1-slh64-smp-32 #1 smp preempt thu nov 15 17:55:06 cet 2007 x86_64 gnulinux '
    config_args='-des'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.2.3 20071014 (prerelease) (Debian 4.2.2-3)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.7'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About