Front page | perl.cpan.testers |
Postings from February 2008
FAIL Language-MPI-2008.0215 darwin-thread-multi-64int-2level 8.10.0
Thread Previous
From:
chris
Date:
February 20, 2008 05:56
Subject:
FAIL Language-MPI-2008.0215 darwin-thread-multi-64int-2level 8.10.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear HANELYP,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Feb 20 13:55:29 2008] Trying to get 'http://www.cpan.org/authors/id/H/HA/HANELYP/Language-MPI-2008.0215.tar.gz'
[MSG] [Wed Feb 20 13:55:41 2008] Trying to get 'http://www.cpan.org/authors/id/H/HA/HANELYP/CHECKSUMS'
[MSG] [Wed Feb 20 13:55:42 2008] Checksum matches for 'Language-MPI-2008.0215.tar.gz'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/Changes'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/lib/'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/lib/Language/'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/lib/Language/MPI.pm'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/Makefile.PL'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/MANIFEST'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/META.yml'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/README'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/t/'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language-MPI-2008.0215/t/MPI.t'
[MSG] [Wed Feb 20 13:55:43 2008] Extracted 'Language::MPI' to '/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Language-MPI-2008.0215'
[MSG] [Wed Feb 20 13:55:47 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Language::MPI
[MSG] [Wed Feb 20 13:55:47 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Feb 20 13:55:55 2008] cp lib/Language/MPI.pm blib/lib/Language/MPI.pm
Manifying blib/man3/Language::MPI.3
[ERROR] [Wed Feb 20 13:55:58 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/MPI......Possible attempt to separate words with commas at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm line 123.
'$VERSION,' is not a valid variable name under strict vars at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm line 123
BEGIN failed--compilation aborted at /Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm line 123.
Compilation failed in require at t/MPI.t line 15.
BEGIN failed--compilation aborted at t/MPI.t line 15.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Test Summary Report
-------------------
t/MPI.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 1 tests but ran 0.
Files=1, Tests=0, 0 wallclock secs ( 0.06 usr 0.03 sys + 0.14 cusr 0.05 csys = 0.28 CPU)
Result: FAIL
Failed 1/1 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Wed Feb 20 13:55:58 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Language-MPI-2008.0215/blib/lib:/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Language-MPI-2008.0215/blib/arch:/Volumes/Media/smoke/perl5.10.0/.cpanplus/5.10.0/build/Language-MPI-2008.0215/blib
PERL5_CPANPLUS_IS_RUNNING = 8676
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /Volumes/Media/smoke/perl5.10.0/bin/perl
UID: $< = 502
EUID: $> = 502
GID: $( = 502 502
EGID: $) = 502 502
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level
uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
config_args='-e -Dprefix=/Volumes/Media/smoke/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O3',
cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-ldbm -ldl -lm -lc
perllibs=-ldl -lm -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'
Thread Previous