FAIL Language-MPI-2008.0215 i686-linux-thread-multi-64int 2.6.16.38

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear HANELYP,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Tue Feb 19 20:04:04 2008] Trying to get 'http://www.cpan.org/authors/id/H/HA/HANELYP/Language-MPI-2008.0215.tar.gz'
[MSG] [Tue Feb 19 20:04:06 2008] Trying to get 'http://www.cpan.org/authors/id/H/HA/HANELYP/CHECKSUMS'
[MSG] [Tue Feb 19 20:04:07 2008] Checksum matches for 'Language-MPI-2008.0215.tar.gz'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/Changes'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/lib/'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/lib/Language/'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/lib/Language/MPI.pm'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/Makefile.PL'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/MANIFEST'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/META.yml'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/README'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/t/'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language-MPI-2008.0215/t/MPI.t'
[MSG] [Tue Feb 19 20:04:07 2008] Extracted 'Language::MPI' to '/home/cpan/blead/.cpanplus/5.11.0/build/Language-MPI-2008.0215'
[MSG] [Tue Feb 19 20:04:10 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Language::MPI

[MSG] [Tue Feb 19 20:04:10 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Feb 19 20:04:13 2008] cp lib/Language/MPI.pm blib/lib/Language/MPI.pm
Manifying blib/man3/Language::MPI.3

[ERROR] [Tue Feb 19 20:04:13 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/blead/bin/perl5.11.0 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/MPI......Possible attempt to separate words with commas at /home/cpan/blead/.cpanplus/5.11.0/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm line 123.
'$VERSION,' is not a valid variable name under strict vars at /home/cpan/blead/.cpanplus/5.11.0/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm line 123
BEGIN failed--compilation aborted at /home/cpan/blead/.cpanplus/5.11.0/build/Language-MPI-2008.0215/blib/lib/Language/MPI.pm line 123.
Compilation failed in require at t/MPI.t line 15.
BEGIN failed--compilation aborted at t/MPI.t line 15.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 1/1 subtests 

Test Summary Report
-------------------
t/MPI.t (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
Files=1, Tests=0,  0 wallclock secs ( 0.01 usr  0.02 sys +  0.07 cusr  0.02 csys =  0.12 CPU)
Result: FAIL
Failed 1/1 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Tue Feb 19 20:04:13 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
    PERL5LIB = :/home/cpan/blead/.cpanplus/5.11.0/build/Language-MPI-2008.0215/blib/lib:/home/cpan/blead/.cpanplus/5.11.0/build/Language-MPI-2008.0215/blib/arch:/home/cpan/blead/.cpanplus/5.11.0/build/Language-MPI-2008.0215/blib
    PERL5_CPANPLUS_IS_RUNNING = 18674
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen.linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/blead/bin/perl5.11.0
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 33334) configuration:
  Platform:
    osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int
    uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
    config_args='-e -Dusedevel -Dprefix=/home/cpan/blead -Dusethreads -Duse64bitint -Dusemymalloc=n'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.0.3', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'

• FAIL Language-MPI-2008.0215 i686-linux-thread-multi-64int 2.6.16.38 by chris