develooper Front page | perl.cpan.testers | Postings from January 2008

FAIL HTML-FromText-2.05 x86_64-linux 2.6.23.1-slh64-smp-32

From:
DEVOGON
Date:
January 30, 2008 09:20
Subject:
FAIL HTML-FromText-2.05 x86_64-linux 2.6.23.1-slh64-smp-32
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear Casey West,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Wed Jan 30 18:17:29 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MA/MARKOV/CHECKSUMS'
[MSG] [Wed Jan 30 18:17:29 2008] Checksum matches for 'HTML-FromMail-0.11.tar.gz'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/t/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/t/pod.t'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/t/00run.t'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Format/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Format/Magic.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Format/OODoc.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Format/Magic.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Format/OODoc.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Page.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Format.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Object.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Object.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Default/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Default/HTMLifiers.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Default/HTMLifiers.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Default/Previewers.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Default/Previewers.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Format.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Head.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Field.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Message.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Page.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Head.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Field.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail/Message.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail.pod'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/lib/HTML/FromMail.pm'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/README'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/Makefile.PL'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/META.yml'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/version'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/demo.pl'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/README'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/show_all.pl'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/templ_demo/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/templ_demo/message/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/templ_demo/message/index.html'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/templ_demo/message/details.html'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/templ_demo/message/reply.html'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/templ_all/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/templ_all/message/'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/examples/templ_all/message/index.html'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/ChangeLog'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML-FromMail-0.11/MANIFEST'
[MSG] [Wed Jan 30 18:17:29 2008] Extracted 'HTML::FromMail' to '/home/d/.cpanplus/5.10.0/build/HTML-FromMail-0.11'
[MSG] [Wed Jan 30 18:17:30 2008] *
**** Installing HTML::FromMail
*

* First, I will check the sanity of all required modules... sometimes
* they do not load, for instance if you have installed a new release
* of Perl without upgrading the libraries.

    HTML::FromText is not yet installed
    OODoc::Template is not yet installed
    Test::Pod version 1.26 is ok (required is 1)
    Mail::Box is not yet installed

* Now, let me ask you whether you want some optional modules to be
* installed as well.  You can always install these modules later, by
* hand, without a need to re-install HTML::FromMail.
*

**** Optional Template::Magic failed:
Can't locate Template/Magic.pm in @INC (@INC contains: /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/lib /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/arch /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/lib /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/arch /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib/lib /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib/arch /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib/lib /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib/arch /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib /home/d/.cpanplus/5.10.0/build/Geo-Point-0.06/blib/lib /home/d/.cpanplus/5.10.0/build/Geo-Point-0.06/blib/arch /home/d/.cpanplus/5.10.0/build/Geo-Point-0.06/blib /usr/local/lib/perl5/5.10.0/x86_64-linux /usr/local/lib/perl5/5.10.0 /usr/local/lib/perl5
 /site_perl/5.10.0/x86_64-linux /usr/local/lib/perl5/site_perl/5.10.0 .) at (eval 12) line 3.

Use: Required if you want to use the Template::Magic formatter, which is
     not required to run the examples.
Do you want to install Template::Magic? yes/no/all [y] y
     Added Template::Magic version 1.02 to the requirements

**** Optional Image::Magick failed:
Can't locate Image/Magick.pm in @INC (@INC contains: /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/lib /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/arch /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/lib /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib/arch /home/d/.cpanplus/5.10.0/build/Geo-Distance-0.11/blib /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib/lib /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib/arch /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib/lib /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib/arch /home/d/.cpanplus/5.10.0/build/Math-Polygon-0.99/blib /home/d/.cpanplus/5.10.0/build/Geo-Point-0.06/blib/lib /home/d/.cpanplus/5.10.0/build/Geo-Point-0.06/blib/arch /home/d/.cpanplus/5.10.0/build/Geo-Point-0.06/blib /usr/local/lib/perl5/5.10.0/x86_64-linux /usr/local/lib/perl5/5.10.0 /usr/local/lib/perl5/s
 ite_perl/5.10.0/x86_64-linux /usr/local/lib/perl5/site_perl/5.10.0 .) at (eval 13) line 3.

Use: When messages contain images, these images can be shown as small
     previews.  This is done with Image::Magick, which is quite hard to
     install (IMHO).  So if you want to give it a try answer yes.
WARN If you do not install Image::Magick, some examples will not work.  But
     you can always install it later.
Do you want to install Image::Magick? yes/no/all [y] y
     Added Image::Magick version 5.0 to the requirements

**** Writing Makefile

Warning: prerequisite Bundle::Template::Magic 0 not found.
Warning: prerequisite HTML::FromText 2.03 not found.
Warning: prerequisite Image::Magick 5.0 not found.
Warning: prerequisite Mail::Box 2.051 not found.
Warning: prerequisite OODoc::Template 0.01 not found.
Warning: prerequisite Template::Magic 1.02 not found.
Writing Makefile for HTML::FromMail

[MSG] [Wed Jan 30 18:17:30 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Jan 30 18:17:30 2008] Module 'HTML::FromMail' requires 'Bundle::Template::Magic' version '0' to be installed 
[MSG] [Wed Jan 30 18:17:30 2008] Module 'HTML::FromMail' requires 'HTML::FromText' version '2.03' to be installed 
[MSG] [Wed Jan 30 18:17:30 2008] Module 'HTML::FromMail' requires 'Image::Magick' version '5.0' to be installed 
[MSG] [Wed Jan 30 18:17:30 2008] Module 'HTML::FromMail' requires 'Mail::Box' version '2.051' to be installed 
[MSG] [Wed Jan 30 18:17:30 2008] Module 'HTML::FromMail' requires 'OODoc::Template' version '0.01' to be installed 
[MSG] [Wed Jan 30 18:17:30 2008] Module 'HTML::FromMail' requires 'Template::Magic' version '1.02' to be installed 
[MSG] [Wed Jan 30 18:17:30 2008] Known uninstallable prereqs Template-Magic-1.39 - aborting install

[MSG] [Wed Jan 30 18:17:30 2008] Will not install prerequisite 'Bundle::Template::Magic' -- Note that the overall install may fail due to this
[MSG] [Wed Jan 30 18:17:30 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/C/CW/CWEST/HTML-FromText-2.05.tar.gz'
[MSG] [Wed Jan 30 18:17:30 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/C/CW/CWEST/CHECKSUMS'
[MSG] [Wed Jan 30 18:17:31 2008] Checksum matches for 'HTML-FromText-2.05.tar.gz'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/bin/'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/bin/text2html'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/Changes'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/ext/'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/ext/emacs-macros.el'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/lib/'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/lib/HTML/'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/lib/HTML/FromText.pm'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/Makefile.PL'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/MANIFEST'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/MANIFEST.SKIP'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/META.yml'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/README'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/01_features.t'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/02_v2.01.t'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/03_v2.02.t'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/04_v2.03.t'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/05_v2.04.t'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/06_v2.05.t'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/99_pod.t'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/files/'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML-FromText-2.05/t/files/paras.txt'
[MSG] [Wed Jan 30 18:17:31 2008] Extracted 'HTML::FromText' to '/home/d/.cpanplus/5.10.0/build/HTML-FromText-2.05'
[MSG] [Wed Jan 30 18:17:31 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Email::Find::addrspec 0.09 not found.
Writing Makefile for HTML::FromText

[MSG] [Wed Jan 30 18:17:31 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Jan 30 18:17:31 2008] Module 'HTML::FromText' requires 'Email::Find::addrspec' version '0.09' to be installed 
[MSG] [Wed Jan 30 18:17:32 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/M/MI/MIYAGAWA/CHECKSUMS'
[MSG] [Wed Jan 30 18:17:33 2008] Checksum matches for 'Email-Find-0.10.tar.gz'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/t/'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/t/addr-spec.t'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/t/rfc822.txt'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/t/RFC822.t'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/t/new-api.t'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/t/Find.t'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/Changes'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/lib/'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/lib/Email/'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/lib/Email/Find.pm'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/lib/Email/Find/'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/lib/Email/Find/addrspec.pm'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/MANIFEST'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/Makefile.PL'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/README'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email-Find-0.10/META.yml'
[MSG] [Wed Jan 30 18:17:33 2008] Extracted 'Email::Find::addrspec' to '/home/d/.cpanplus/5.10.0/build/Email-Find-0.10'
[MSG] [Wed Jan 30 18:17:34 2008] Writing Makefile for Email::Find

[MSG] [Wed Jan 30 18:17:34 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Jan 30 18:17:34 2008] Manifying blib/man3/Email::Find::addrspec.3
Manifying blib/man3/Email::Find.3

[MSG] [Wed Jan 30 18:17:34 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/addr-spec......
1..2
ok 1 - use Email::Find::addrspec;
ok 2
ok
t/Find...........
1..17
ok 1 - use Email::Find;
ok 2 - Found *@qz.to
ok 3 -   just one
ok 4 -   and replaced
ok 5 - Found %2Fjoe@123.com
ok 6 -   just one
ok 7 -   and replaced
ok 8 - Found joe@123.com
ok 9 -   just one
ok 10 -   and replaced
ok 11 - Found somelongusername@aol.com
ok 12 -   just one
ok 13 -   and replaced
ok 14 - Found "@"@foo.com
ok 15 -   just one
ok 16 -   and replaced
ok 17 - One big block
ok
t/new-api........
ok 1 - use Email::Find;
ok 2 - Found *@qz.to
ok 3 -   just one
ok 4 -   and replaced
ok 5 - Found %2Fjoe@123.com
ok 6 -   just one
ok 7 -   and replaced
ok 8 - Found joe@123.com
ok 9 -   just one
ok 10 -   and replaced
ok 11 - Found somelongusername@aol.com
ok 12 -   just one
ok 13 -   and replaced
ok 14 - Found "@"@foo.com
ok 15 -   just one
ok 16 -   and replaced
1..16
ok
t/RFC822.........
1..2
ok 1 - use Email::Find;
ok 2 - Found all addresses in RFC822
ok
All tests successful.
Files=4, Tests=37,  0 wallclock secs ( 0.03 usr  0.01 sys +  0.36 cusr  0.04 csys =  0.44 CPU)
Result: PASS

[MSG] [Wed Jan 30 18:17:34 2008] Sending test report for 'Email-Find-0.10'
[MSG] [Wed Jan 30 18:17:35 2008] Ok, not sending test report
[MSG] [Wed Jan 30 18:17:35 2008] cp lib/HTML/FromText.pm blib/lib/HTML/FromText.pm
cp bin/text2html blib/script/text2html
/usr/local/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/text2html
Manifying blib/man1/text2html.1
Manifying blib/man3/HTML::FromText.3

[ERROR] [Wed Jan 30 18:17:36 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/01_features......
ok 1 - use HTML::FromText;
ok 2 - default isa HTML::FromText
ok 3 - metachars encoded <> correctly
ok 4 - underline did
ok 5 - underline should not across lines
ok 6 - bold did
ok 7 - urls did
ok 8 - urls and metachars did
ok 9 - email did
ok 10 - pre did
ok 11 - lines did
ok 12 - lines and spaces did
ok 13 - one paragraph
ok 14 - two paragraphs
ok 15 - single bullet list
ok 16 - nested bullet list
ok 17 - nested bullets and normal paragraph
ok 18 - nested numbers and normal paragraph
ok 19 - headings
ok 20 - title
ok 21 - blockparas
ok 22 - blockquotes
ok 23 - blockcode
ok 24 - tables
ok 25 - indented tables
ok 26 - should not be table
ok 27 - indented tables with normal para
not ok 28 - indented tables with normal para
1..28
 Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/28 subtests 

#   Failed test 'indented tables with normal para'
#   at t/01_features.t line 286.
#          got: '<table class="hft-tables">
#   <tr><td>http://www.pm.org</td><td>Perl Mongers</td></tr>
#   <tr><td>http://perl.com</td><td>O&#39;Reilly Perl Center</td></tr>
#   <tr><td>http://lists.perl.org</td><td>List of Mailing Lists</td></tr>
#   <tr><td>http://use.perl.org</td><td>Perl News and Community Journals</td></tr>
#   <tr><td>http://perl.apache.org</td><td>mod_perl</td></tr>
#   <tr><td>http://theperlreview.com</td><td>The Perl Review</td></tr>
# </table>
# '
#     expected: '<table class="hft-tables">
#   <tr><td>http://www.pm.org</td><td>Perl Mongers</td></tr>
#   <tr><td>http://perl.com</td><td>O'Reilly Perl Center</td></tr>
#   <tr><td>http://lists.perl.org</td><td>List of Mailing Lists</td></tr>
#   <tr><td>http://use.perl.org</td><td>Perl News and Community Journals</td></tr>
#   <tr><td>http://perl.apache.org</td><td>mod_perl</td></tr>
#   <tr><td>http://theperlreview.com</td><td>The Perl Review</td></tr>
# </table>
# '
# Looks like you failed 1 test of 28.
t/02_v2.01.........
ok 1 - use HTML::FromText;
ok 2 - mixing bullets should not work
ok 3 - url with hash
ok 4 - complex underlines
ok 5 - complex bolds
not ok 6 - complex bullets
1..6

#   Failed test 'complex bullets'
#   at t/02_v2.01.t line 78.
#          got: '<ul class="hft-bullets">
# <li> Fast, powerful and extensible template processing system. </li>
#  <ul class="hft-bullets">
#  <li>         Powerful presentation language supports all standard templating directives, e.g. variable substitution, includes, conditionals,
#           loops. </li>
#    <ul class="hft-bullets">
#    <li>       Many additional features such as output filtering, exception handling, macro definition, support for plugin objects, definition
#           of template metadata, embedded Perl code (only enabled by EVAL_PERL option), definition of template blocks, a &#39;switch&#39;
#           statement, and more. </li>
#    <li>       Full support for complex Perl data types such as hashes, lists, objects and sub-routine references. </li>
#    </ul>
#   <li>        Clear separation of concerns between user interface (templates), application code (Perl objects/sub-routines) and data
#           (Perl data). </li>
#    <ul class="hft-bullets">
#    <li>       Programmer-centric back end, allowing application logic and data structures to be built in Perl. </li>
#    <li>       Designer-centric front end, hiding underlying complexity behind simple variable access. </li>
#    <li>       Templates are compiled to Perl code for maximum runtime efficiency and performance. Compiled templates are cached
#           and can be written to disk in &quot;compiled form&quot; (e.g. Perl code) to achieve cache persistance. </li>
#     <ul class="hft-bullets">
#     <li>      Well suited to online dynamic web content generation (e.g. Apache/mod_perl). </li>
#     <li>      Also has excellent support for offline batch processing for generating static pages (e.g. HTML, POD, LaTeX, PostScript,
#           plain text) from source templates. </li>
#      <ul class="hft-bullets">
#      <li>     Comprehensive documentation including tutorial and reference manuals. </li>
#      <li>     Fully Open Source and Free </li>
# </ul>
# </ul>
# </ul>
# </ul>
# </ul>
# '
#     expected: '<ul class="hft-bullets">
# <li> Fast, powerful and extensible template processing system. </li>
#  <ul class="hft-bullets">
#  <li>         Powerful presentation language supports all standard templating directives, e.g. variable substitution, includes, conditionals,
#           loops. </li>
#    <ul class="hft-bullets">
#    <li>       Many additional features such as output filtering, exception handling, macro definition, support for plugin objects, definition
#           of template metadata, embedded Perl code (only enabled by EVAL_PERL option), definition of template blocks, a 'switch'
#           statement, and more. </li>
#    <li>       Full support for complex Perl data types such as hashes, lists, objects and sub-routine references. </li>
#    </ul>
#   <li>        Clear separation of concerns between user interface (templates), application code (Perl objects/sub-routines) and data
#           (Perl data). </li>
#    <ul class="hft-bullets">
#    <li>       Programmer-centric back end, allowing application logic and data structures to be built in Perl. </li>
#    <li>       Designer-centric front end, hiding underlying complexity behind simple variable access. </li>
#    <li>       Templates are compiled to Perl code for maximum runtime efficiency and performance. Compiled templates are cached
#           and can be written to disk in &quot;compiled form&quot; (e.g. Perl code) to achieve cache persistance. </li>
#     <ul class="hft-bullets">
#     <li>      Well suited to online dynamic web content generation (e.g. Apache/mod_perl). </li>
#     <li>      Also has excellent support for offline batch processing for generating static pages (e.g. HTML, POD, LaTeX, PostScript,
#           plain text) from source templates. </li>
#      <ul class="hft-bullets">
#      <li>     Comprehensive documentation including tutorial and reference manuals. </li>
#      <li>     Fully Open Source and Free </li>
# </ul>
# </ul>
# </ul>
# </ul>
# </ul>
# '
# Looks like you failed 1  Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/6 subtests 
test of 6.
t/03_v2.02.........
ok 1 - output from text2html correct
ok 2 - use HTML::FromText;
ok 3 - blockcode should preserve spaces
1..3
ok
t/04_v2.03.........
ok 1 - use HTML::FromText;
ok 2 - blockcode should use pre
ok 3 - blockparas should use p
ok 4 - blockquotes should use div
ok 5 - table should work
ok 6 - table should work
1..6
ok
t/05_v2.04.........
1..1
ok 1 - use HTML::FromText;
ok
t/06_v2.05.........
ok 1 - use HTML::FromText;
ok 2 - blockcode consolidated
ok 3 - blockparas consolidated
1..3
ok
t/99_pod...........
1..8
ok 1 - POD test for blib/lib/HTML/FromText.pm
ok 2 - POD test for t/03_v2.02.t
ok 3 - POD test for t/02_v2.01.t
ok 4 - POD test for t/99_pod.t
ok 5 - POD test for t/04_v2.03.t
ok 6 - POD test for t/05_v2.04.t
ok 7 - POD test for t/01_features.t
ok 8 - POD test for t/06_v2.05.t
ok

Test Summary Report
-------------------
t/01_features.t (Wstat: 256 Tests: 28 Failed: 1)
  Failed test:  28
  Non-zero exit status: 1
t/02_v2.01.t   (Wstat: 256 Tests: 6 Failed: 1)
  Failed test:  6
  Non-zero exit status: 1
Files=7, Tests=55,  0 wallclock secs ( 0.06 usr  0.02 sys +  0.46 cusr  0.10 csys =  0.64 CPU)
Result: FAIL
Failed 2/7 test programs. 2/55 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Wed Jan 30 18:17:36 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Template::Magic
Image::Magick

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'Casey West (casey@geeknest.com)',
    ... # other information
    PREREQ_PM   => {
	'Template::Magic'	=> '0', # or a minimum working version
	'Image::Magick'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Email::Find::addrspec              0.09     0.09
	  Exporter::Lite                     0.02     0.01
	  HTML::Entities                     1.35     1.26
	  Scalar::Util                       1.19     1.12
	  Test::More                         0.74     0.47
	  Text::Tabs                     2007.1117  98.1128

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.23.1-slh64-smp-32, archname=x86_64-linux
    uname='linux sanremo.defietser 2.6.23.1-slh64-smp-32 #1 smp preempt thu nov 15 17:55:06 cet 2007 x86_64 gnulinux '
    config_args='-des'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.2.3 20071014 (prerelease) (Debian 4.2.2-3)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.7'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About