Front page | perl.cpan.testers.discuss |
Postings from April 2008
Re: FAIL Net-UCP-0.34 MSWin32-x86-multi-thread 5.1
Thread Previous
From:
Marco Romano
Date:
April 11, 2008 06:10
Subject:
Re: FAIL Net-UCP-0.34 MSWin32-x86-multi-thread 5.1
Hi David,
Thanks! i'll upgrade it setting PREREQ_PM too.
Bye,
Marco.
Il giorno ven, 11/04/2008 alle 06.21 -0400, David Golden ha scritto:
> Dear Marco,
>
> Your module uses ExtUtils::AutoInstall -- which attempts to invoke
> CPANPLUS, which I do not support and thus do not have configured.
>
> Your module will fail on any machine that similarily has not
> configured CPANPLUS.
>
> I strongly encourage you not to use AutoInstall. Just include your
> prerequisites in PREREQ_PM and it should be fine.
>
> Regards,
> David
>
>
> On Fri, Apr 11, 2008 at 3:14 AM, Marco Romano <nemux@cpan.org> wrote:
> > Dear tester,
> >
> > i think there's a little configuration problem in your test
> > environment.
> >
> > C:\strawberry\perl\bin\perl.exe Makefile.PL --config=
> > --installdeps=Net::UCP::Common,0.01,Net::UCP::IntTimeout,0.02,Net::UCP::TransactionManager,0.01
> > *** Installing dependencies...
> > [ERROR] Fetching of 'file:///bogus-path/authors/01mailrc.txt.gz' failed:
> > Could not copy 'bogus-path\authors\01mailrc.txt.gz' to 'C:\Documents and
> > Settings\David\Application Data\.cpanplus/01mailrc.txt.gz': No such file
> > or directory
> >
> > [ERROR] Fetch failed: host list exhausted -- are you connected today?
> >
> > [ERROR] Couldn't fetch '01mailrc.txt.gz'
> >
> >
> >
> > Il giorno ven, 11/04/2008 alle 00.16 -0400, DAGOLDEN ha scritto:
> > > This distribution has been tested as part of the cpan-testers
> > > effort to test as many new uploads to CPAN as possible. See
> > > http://testers.cpan.org/
> > >
> > > Please cc any replies to cpan-testers@perl.org to keep other
> > > test volunteers informed and to prevent any duplicate effort.
> > >
> > > --
> > > Dear Marco Romano,
> > >
> > > This is a computer-generated report for Net-UCP-0.34
> > > on perl 5.10.0, created by CPAN-Reporter-1.13.
> > >
> > > Thank you for uploading your work to CPAN. However, there was a problem
> > > testing your distribution.
> > >
> > > If you think this report is invalid, please consult the CPAN Testers Wiki
> > > for suggestions on how to avoid getting FAIL reports for missing library
> > > or binary dependencies, unsupported operating systems, and so on:
> > >
> > > http://cpantest.grango.org/wiki/CPANAuthorNotes
> > >
> > > Sections of this report:
> > >
> > > * Tester comments
> > > * Program output
> > > * Prerequisites
> > > * Environment and other context
> > >
> > > ------------------------------
> > > TESTER COMMENTS
> > > ------------------------------
> > >
> > > Additional comments from tester:
> > >
> > > this report is from an automated smoke testing program
> > > and was not reviewed by a human for accuracy
> > >
> > > ------------------------------
> > > PROGRAM OUTPUT
> > > ------------------------------
> > >
> > > Output from 'C:\strawberry\c\bin\dmake.EXE test':
> > >
> > > C:\strawberry\perl\bin\perl.exe Makefile.PL --config= --installdeps=Net::UCP::Common,0.01,Net::UCP::IntTimeout,0.02,Net::UCP::TransactionManager,0.01
> > > *** Installing dependencies...
> > > [ERROR] Fetching of 'file:///bogus-path/authors/01mailrc.txt.gz' failed: Could not copy 'bogus-path\authors\01mailrc.txt.gz' to 'C:\Documents and Settings\David\Application Data\.cpanplus/01mailrc.txt.gz': No such file or directory
> > >
> > > [ERROR] Fetch failed: host list exhausted -- are you connected today?
> > >
> > > [ERROR] Couldn't fetch '01mailrc.txt.gz'
> > >
> > > [ERROR] Fetching of 'file:///bogus-path/modules/03modlist.data.gz' failed: Could not copy 'bogus-path\modules\03modlist.data.gz' to 'C:\Documents and Settings\David\Application Data\.cpanplus/03modlist.data.gz': No such file or directory
> > >
> > > [ERROR] Fetch failed: host list exhausted -- are you connected today?
> > >
> > > [ERROR] Couldn't fetch '03modlist.data.gz'
> > >
> > > [ERROR] Fetching of 'file:///bogus-path/modules/02packages.details.txt.gz' failed: Could not copy 'bogus-path\modules\02packages.details.txt.gz' to 'C:\Documents and Settings\David\Application Data\.cpanplus/02packages.details.txt.gz': No such file or directory
> > >
> > > [ERROR] Fetch failed: host list exhausted -- are you connected today?
> > >
> > > [ERROR] Couldn't fetch '02packages.details.txt.gz'
> > >
> > > Key 'archive' (C:\Documents and Settings\David\Application Data\.cpanplus\01mailrc.txt.gz) is of invalid type for 'Archive::Extract::new' provided by CPANPLUS::Internals::Source::__create_author_tree at C:/strawberry/perl/lib/CPANPLUS/Internals/Source.pm line 659
> > > Key 'archive' (C:\Documents and Settings\David\Application Data\.cpanplus\03modlist.data.gz) is of invalid type for 'Archive::Extract::new' provided by CPANPLUS::Internals::Source::__create_dslip_tree at C:/strawberry/perl/lib/CPANPLUS/Internals/Source.pm line 881
> > > Key 'archive' (C:\Documents and Settings\David\Application Data\.cpanplus\02packages.details.txt.gz) is of invalid type for 'Archive::Extract::new' provided by CPANPLUS::Internals::Source::_create_mod_tree at C:/strawberry/perl/lib/CPANPLUS/Internals/Source.pm line 745
> > > *** Installing Net::UCP::Common...
> > > *** Could not find a version 0.01 or above for Net::UCP::Common; skipping.
> > > *** Installing Net::UCP::IntTimeout...
> > > *** Could not find a version 0.02 or above for Net::UCP::IntTimeout; skipping.
> > > *** Installing Net::UCP::TransactionManager...
> > > *** Could not find a version 0.01 or above for Net::UCP::TransactionManager; skipping.
> > > *** ExtUtils::AutoInstall installation finished.
> > > C:\strawberry\perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/Net-UCP.t
> > > t/Net-UCP......Can't locate Net/UCP/Common.pm in @INC (@INC contains: C:\strawberry\cpan\build\Net-UCP-0.34-67M9M2\blib\lib C:\strawberry\cpan\build\Net-UCP-0.34-67M9M2\blib\arch C:/STRAWB~1/perl/lib C:/STRAWB~1/perl/site/lib .) at C:\strawberry\cpan\build\Net-UCP-0.34-67M9M2\blib\lib/Net/UCP.pm line 28.
> > > BEGIN failed--compilation aborted at C:\strawberry\cpan\build\Net-UCP-0.34-67M9M2\blib\lib/Net/UCP.pm line 28.
> > > Compilation failed in require at t/Net-UCP.t line 11.
> > > BEGIN failed--compilation aborted at t/Net-UCP.t line 11.
> > > Dubious, test returned 2 (wstat 512, 0x200)
> > > Failed 5/5 subtests
> > >
> > > Test Summary Report
> > > -------------------
> > > t/Net-UCP.t (Wstat: 512 Tests: 0 Failed: 0)
> > > Non-zero exit status: 2
> > > Parse errors: Bad plan. You planned 5 tests but ran 0.
> > > Files=1, Tests=0, 1 wallclock secs ( 0.00 usr + 0.03 sys = 0.03 CPU)
> > > Result: FAIL
> > > Failed 1/1 test programs. 0/0 subtests failed.
> > > dmake.EXE: Error code 130, while making 'test_dynamic'
> > >
> > > ------------------------------
> > > PREREQUISITES
> > > ------------------------------
> > >
> > > Prerequisite modules loaded:
> > >
> > > No requirements found
> > >
> > > ------------------------------
> > > ENVIRONMENT AND OTHER CONTEXT
> > > ------------------------------
> > >
> > > Environment variables:
> > >
> > > AUTOMATED_TESTING = 1
> > > COMSPEC = C:\WINDOWS\system32\cmd.exe
> > > INCLUDE = ;C:\strawberry\c\include;C:\strawberry\perl\lib\CORE
> > > LIB = ;C:\strawberry\c\lib;C:\strawberry\perl\bin
> > > NUMBER_OF_PROCESSORS = 1
> > > PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\bin;C:\strawberry\c\bin;C:\strawberry\perl\bin
> > > PERL5LIB =
> > > PERL5OPT =
> > > PERL5_CPANPLUS_IS_RUNNING = 1156
> > > PERL5_CPAN_IS_RUNNING = 1156
> > > PERL5_CPAN_IS_RUNNING_IN_RECURSION = 1076,1156
> > > PERL_CR_SMOKER_CURRENT = Net-UCP-0.34
> > > PERL_MM_USE_DEFAULT = 1
> > > PROCESSOR_IDENTIFIER = x86 Family 6 Model 15 Stepping 6, GenuineIntel
> > > TEMP = C:\DOCUME~1\David\LOCALS~1\Temp
> > > TERM = dumb
> > >
> > > Perl special variables (and OS-specific diagnostics, for MSWin32):
> > >
> > > $^X = C:\strawberry\perl\bin\perl.exe
> > > $UID/$EUID = 0 / 0
> > > $GID = 0
> > > $EGID = 0
> > > Win32::GetOSName = WinXP/.Net
> > > Win32::GetOSVersion = Service Pack 2, 5, 1, 2600, 2, 2, 0, 768, 1
> > > Win32::FsType = FAT32
> > > Win32::IsAdminUser = 1
> > >
> > > Perl module toolchain versions installed:
> > >
> > > Module Have
> > > ------------------- ---------
> > > CPAN 1.92_59
> > > Cwd 3.2701
> > > ExtUtils::CBuilder 0.21
> > > ExtUtils::Command 1.13
> > > ExtUtils::Install 1.44
> > > ExtUtils::MakeMaker 6.42
> > > ExtUtils::Manifest 1.51_01
> > > ExtUtils::ParseXS 2.18_02
> > > File::Spec 3.2701
> > > Module::Build 0.2808_01
> > > Module::Signature n/a
> > > Test::Harness 3.09
> > > Test::More 0.74
> > > YAML 0.66
> > > YAML::Syck 1.04
> > > version 0.74
> > >
> > >
> > > --
> > >
> > > Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
> > > Platform:
> > > osname=MSWin32, osvers=5.1, archname=MSWin32-x86-multi-thread
> > > uname=''
> > > config_args='undef'
> > > hint=recommended, useposix=true, d_sigaction=undef
> > > useithreads=define, usemultiplicity=define
> > > useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
> > > use64bitint=undef, use64bitall=undef, uselongdouble=undef
> > > usemymalloc=n, bincompat5005=undef
> > > Compiler:
> > > cc='gcc', ccflags =' -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -DPERL_MSVCRT_READFIX',
> > > optimize='-s -O2',
> > > cppflags='-DWIN32'
> > > ccversion='', gccversion='3.4.5', gccosandvers=''
> > > intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
> > > d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=12
> > > ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='long long', lseeksize=8
> > > alignbytes=8, prototype=define
> > > Linker and Libraries:
> > > ld='g++', ldflags ='-s -L"C:\strawberry\perl\lib\CORE" -L"C:\strawberry\c\lib"'
> > > libpth=C:\strawberry\c\lib
> > > libs= -lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32
> > > perllibs= -lmsvcrt -lmoldname -lkernel32 -luser32 -lgdi32 -lwinspool -lcomdlg32 -ladvapi32 -lshell32 -lole32 -loleaut32 -lnetapi32 -luuid -lws2_32 -lmpr -lwinmm -lversion -lodbc32 -lodbccp32
> > > libc=-lmsvcrt, so=dll, useshrplib=true, libperl=libperl510.a
> > > gnulibc_version=''
> > > Dynamic Linking:
> > > dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
> > > cccdlflags=' ', lddlflags='-mdll -s -L"C:\strawberry\perl\lib\CORE" -L"C:\strawberry\c\lib"'
> >
> >
Thread Previous